MTN649804 Blind actuator REG-K/4x/10 with manual mode, light grey
Los precios con impuestos incluidos son visibles para los clientes de la UE. Clientes comerciales, contáctenos o inicie sesión para beneficiarse de exenciones de impuestos.
When sold out, you can still preorder by requesting a quote below.
KNX blind actuator REG-K/4x/10 with manual mode. For independent control of 4 blind/roller shutter drives. The function of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation. Channel status display via LEDs. A green LED indicates readiness for operation. With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. A data rail is not necessary. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. 8-bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions. For each blind output: Nominal voltage: AC 100-240 V ±10%. Operating voltage: min. AC 90 V - max. AC 265 V. Mains frequency: 50-60 Hz ±10%. Nominal current: 10 A, inductive load cos Phi 0.6. Motor load: AC 100 V, max. 434 W. AC 230 V, max. 1000 W. AC 240 V, max. 1043 W. Device width: 4 modules, approx. 72 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.
Importante
Las imágenes mostradas son sólo para fines ilustrativos y pueden no ser una imagen exacta.
representación del producto.
