Productos

End connection, 2 x DN15 Solder End connections with Fibre Gaskets, G 3/4 to valve, 15 mmSolder.

End connection, 2 x DN25 Solder, End connections with Fibre Gaskets, G 1.1/4 to valve, 28 mmSolder.

End connection, 2 x DN32 Solder, End connections with Fibre Gaskets, G 1.1/2 to valve, 35 mmSolder.

End connection, 2 x DN4 Solder, End connections with Fibre Gaskets, G 2 to valve, 42 mmSolder.

End connection, 2 x DN5 Solder, End connections with Fibre Gaskets, G 2.1/2 to valve, 54 mmSolder.

End connection, 2 x DN15 Solder, End connections with Fibre Gaskets, G 3/4 to valve, 22 mmSolder.

End connection, 2 x DN2 Solder, End connections with Fibre Gaskets, G 1 to valve, 22 mmSolder.

End connection, 2 x DN2 Weld, End connections with Fibre Gaskets, G 1 to valve, 26.9 mm Weld.

End connection, 2 x DN25 Weld, End connections with Fibre Gaskets, G 1.1/4 to valve, 33.7 mm Weld.

End connection, 2 x DN32 Weld, End connections with Fibre Gaskets, G 1.1/2 to valve, 42.4 mm Weld.

End connection, 2 x DN4 Weld, End connections with Fibre Gaskets, G 2 to valve, 48.3 mm Weld.

End connection, 2 x DN5 Weld, End connections with Fibre Gaskets, G 2.1/2 to valve, 6.3 mm Weld.

DN4 to DN1 Handle This handle is used instead of the actuator, it locks the PIBCV flow setting providing a fixed flow output

DN125 to DN15 Handle This handle is used instead of the actuator, it locks the PIBCV flow setting providing a fixed flow output

DN2 to DN25 Handle This handle is used instead of the actuator, it locks the PIBCV flow setting providing a fixed flow output

1.5m Digital cable. For connecting power and signal to SP9. 1.5 m long.

1M DIGITAL CABLE For connecting power and signal to SP9 1 m long

1.5 m long cable for daisy chaining SP9 actuators together. For daisy chaining actuators together. 1.5 m long.

5 m long cable for daisy chaining SP9 actuators together. 5 m long cable for daisy chaining SP9 actuators together 5 m long.

1 m long cable for daisy chaining SP9 actuators together. 1 m long cable for daisy chaining SP9 actuators together 1 m long.

The Analogue cable is used for connecting power, -1V I/O signal and 2 x RTD into the SP9 actuator. it allows the SP9 to be used as a connection hub...

Strap on temperature sensor cables for SP9, 1.5 m long, strap to the pipe and insulate. 1.5 m long.

immersion temperature sensor probes for SP9, 1.5 m long, strap to the pipe and insulate. 1.5 m long.

VP22 Replacement Stem adaptor