Productos

Top or bottom plain blanking plate made of zinc coated steel sheet and delivered with the fixings required for installation.

Top or bottom plain blanking plate with ventilation louvres made of zinc coated steel sheet and delivered with the fixings required for installation.

Blanking plate with brush gasket to be fixed on the top or bottom openings of the enclosure. Made of zinc coated steel sheet and delivered with all...

Batch of 2 brush gaskets, assembled at the top or bottom of the side panels with 35mm cable entry width. Depth of the gasket is 1000mm.

Batch of 2 brush gaskets, assembled at the top or bottom of the side panels with 35mm cable entry width. Depth of the gasket is 600mm.

Batch of 2 brush gaskets, assembled at the top or bottom of the side panels with 35mm cable entry width. Depth of the gasket is 800mm.

Total brush gasket to be fixed to the top and bottom cable entries. Dimensions of the gasket are 100mm by 300mm.

Top or bottom blanking plate with 2 fans installed and wired to the termibacl block, including a protection grille. To be fixed to the top or botto...

Universal fixing plate to be fixed to the 19-inch uprights or to the framework uprights for mounting accessories.

2U partial fixed 19-inch slide fixed by attachment on the front or rear 19-inch uprights, made of treated steel and with an acceptable load of 30kg...

Metal guides delivered with the mountings elements (screw, nut) to be installed on the 19-inch rack, laterally on the framework uprights inside the...

Metal guides delivered with the mountings elements (screw, nut) to be installed on the 19-inch rack, laterally on the framework uprights inside the...

Cable management guide to be mounted on the 19-inch uprights or all the cable support cross rails or at the rear of the 19-inch shelves. Dimensions...

Cable management guide to be mounted on the 19-inch uprights or all the cable support cross rails or at the rear of the 19-inch shelves. Dimensions...

Cable management guide to be mounted on the 19-inch uprights or all the cable support cross rails or at the rear of the 19-inch shelves. Dimensions...

Cable management wired guides made of treated steel for side mounting on the 19-inch uprights. Batch of 10 wired guides.

Cable management guide to proect and guide the cable on the sheet edges. Fixed by simply clipping onto the sheet edge.

Partial fixed slides for supporting a drawer, a shelf or 19-inch hardware. Fixed by attachment on the front 19-inch uprights and made of zinc coate...

This product is a batch of 2 slides for the 19-inch hardware. It is made of treated steel and can support up to 60kg of load. Without heel height. ...

This product is a batch of 2 slides for the 19-inch hardware. it is made of treated steel and can support up to 60kg of load. With plus or minus 5m...