ABB

The CP2-30R-20 Pushbutton is: Compact - Pushbutton - Maintained - Flush - Red - Non-illuminated - Chrome Metal - 2NO - 2 NO - 0 NC - 300 VThis Push...

The MPET4-10R Emergency stop is: Twist release - Momentary - Mushroom 40 mm - Red - Non-illuminated - No contact blockThis Emergency stop is part o...

The CR-PSS socket is from the CR-P (pcb) relay range. The standard socket is suitable for CR-P relays with 1 or 2 c/o (SPDT) output contacts. The s...

The CE4T-10R-11 Emergency stop is: Compact - Emergency stop - Twist release - Maintained - Mushroom 40 mm - Red - Non-illuminated - 1NO+1NC - 1 NO ...

S1-M1-25 three phase feeder terminals allow the connection of bigger cable cross sections up to 25mm². They are usable with MS116 and MS132 manual ...

Auxiliary contact block for contactors AF116…AF370

Auxiliary contact block for contactors AF116…AF370

2 pole screw type side mounted auxilliary contact block fitted outside CAL18-11, instantaneous N.O. and N.C. contacts, suitable for standard indust...

The MCB-01 Contact Block is: - Non-illuminated - Single contact block - Front mounting - silver (Ag) - 0 NO - 1NC - 690 VThis Contact Block is par...

2 CHANGEOVER CONTACTS OPEN-CLOSED V <(><<)> 400V AC WIRED T4-T5-T6

OTS125T3 TERMINAL SHROUD

CAL4-11 is a 2-pole side mounted auxiliary contact block equipped with screw terminals and can be fitted on AF(C)09(Z)(B)...96 contactors and NF(C)...

The MPMP3-11R Emergency stop is: Pull release - Maintained - Mushroom 40 mm - Red - Illuminated - No contact blockThis Emergency stop is part of AB...

Color: Anthracite.Rated voltage: 250 Vac Rated current: 16A Type F: 2P + E Shuttered for child safety Screw terminalsSize: 2 modules.

Choice through a selector between indication of the position of the device’s contacts and signalling of a fault (overcurrent/short-circuit for MCBs...

The CR-PLS socket is from the CR-P (pcb) relay range. The logical socket with safety isolation is suitable for CR-P relays with 1 or 2 c/o (SPDT) o...

BER16-4 is a connection set for reversing contactors used to easily connect the main poles of two 3-pole AF09..AF16, AFC09..AFC16 or AFS09..AFS16 c...

OXS6X160 SHAFT for selector handle

CAL4-11 is a 2-pole side mounted auxiliary contact block equipped with screw terminals and can be fitted on A9 ... 75 contactors and N contactor re...

S2-H20 2NO AUXILIARY CONTACTS

S1-M2-25 three phase feeder terminals allow the connection of bigger cable cross sections up to 25mm². They are usable with MS116 and MS132 manual ...

Busbar PS1/12. 1 Phase Busbar, 12 PINs, 10mm2

The CT-ERD.12 is a single-function electronic time relay from the CT-D timer range. It provides an ON-delay (delay on make) function with 7 time ra...