Siemens 6ES7134-6HB00-0CA1 ET 200SP Analog Input AI 2xU/I HF 16-bit

The Siemens 6ES7134-6HB00-0CA1 is a SIMATIC ET 200SP analog input module with 2 differential channels for voltage or current measurement in 2-wire or 4-wire connection. It is a High Feature module with 16-bit resolution, channel-by-channel diagnostics and isochronous mode, and plugs onto a BU type A0 or A1 BaseUnit.

Technical specifications:

• MLFB: 6ES7134-6HB00-0CA1
• Manufacturer: Siemens
• Product line: SIMATIC ET 200SP
• Product type designation: AI 2xU/I 2-/4-wire HF
• Number of analog inputs: 2, differential inputs
• Resolution: 16 bit including sign
• Voltage input ranges: 0 to +10 V, 1 to 5 V, -10 to +10 V, -5 to +5 V
• Current input ranges: 0 to 20 mA, 4 to 20 mA, -20 to +20 mA
• Input resistance: 75 kOhm (voltage), 130 Ohm (current)
• Measurement principle: Sigma Delta
• Basic error limit at 25 C: 0.05 % of input range
• Operational error limit over temperature range: 0.1 % of input range
• Supply voltage: 24 V DC (19.2 to 28.8 V), reverse polarity protected
• Current consumption: 39 mA without sensor supply
• Power loss: 0.95 W without sensor supply
• Encoder supply: 24 V, short-circuit protected, max. 20 mA per channel (2-wire)
• Isochronous mode: Yes, 250 us
• Diagnostics: Wire break (4-20 mA), short-circuit, overflow/underflow, supply voltage monitoring, limit value alarm
• Isolation: Between channels, and between channels and backplane bus; tested with 707 V DC
• Usable BaseUnits: BU type A0, A1
• Colour code: CC03
• Mechanical coding element: Type A
• Engineering: STEP 7 TIA Portal from V13, STEP 7 from V5.5, PCS 7 from V8.1 SP1
• Max. shielded cable length: 1 000 m (200 m for voltage measurement)
• Operating temperature: -30 C to 60 C (horizontal installation)
• Dimensions (WxHxD): 15 x 73 x 58 mm
• Weight: 32 g

Features and benefits:

• High Feature module: 16-bit resolution and 0.05 % basic error limit at 25 C
• Channel-by-channel diagnostics with wire-break and short-circuit detection
• Isochronous mode down to 250 us for deterministic acquisition
• Parameterisable integration time and interference-frequency suppression (16.6 / 50 / 60 Hz and higher)
• Reparameterisation and calibration possible in RUN
• Firmware update supported; I&M0 to I&M3 data

Applications:

• Analog signal acquisition in distributed ET 200SP I/O stations
• Reading 4-20 mA transmitters with wire-break monitoring
• High-accuracy voltage measurement in process and machine control
• PROFINET or PROFIBUS distributed I/O built with SIMATIC S7 controllers

SIMATIC ET 200SP module, HW functional status from FS06. Requires a BU type A0 or A1 BaseUnit (ordered separately).

Also known as: Siemens 6ES7134-6HB00-0CA1, ET 200SP AI 2xU/I 2-/4-wire High Feature.