Hager rozvodné desky, sběrnice a elektrické komponenty

The Hager SFT240 is a 2-pole modular changeover switch with a top common point and three switching positions (I-0-II), designed for controlled swit...

The Hager SF463 is a 4-pole 63A changeover switch with I-0-II switching positions (source 1 - off - source 2), rated at 230/400V. Used for manual c...

The Hager VF418PD is a Golf series flush-mounted distribution board with 4 rows of 18 DIN rail module positions each (72 modules total), rated IP40...

The Hager KDN163A is a 1-pole phase busbar with fork connection, designed to distribute single-phase power across up to 12 module positions within ...

The Hager SFT140 is a 1-pole modular changeover switch with a top common point and three switching positions (I-0-II), designed for controlled swit...

The Hager SFT440 is a 4-pole 40A modular changeover switch with centre-off position for DIN rail mounting. It simultaneously switches three-phase p...

The Hager VU60NC is a flush-mount small distribution board (Kleinverteiler, Unterputz) offering 60-module capacity across 5 rows, rated at 63 A and...

The Hager ESC463 is a 4-pole installation contactor rated at 63 A with a 230V AC coil, designed for switching resistive and slightly inductive load...

The Hager MB116A is a Hager MB1 miniature circuit breaker, 1P, 16 A, B curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical ...

The Hager ESC325 is a 3-pole installation contactor rated at 25A, with 3 normally open contacts and a 230V AC control voltage. It is designed for D...

The Hager ESC226 is a 25 A installation contactor with a 2NC (2 normally closed) contact configuration, designed for DIN rail mounting in residenti...

The Hager KF83A is a 1-pole connection terminal with pin (prong) connection, suitable for conductor cross-sections up to 35 mm² on rigid cables and...

The Hager ESC225 is a 2-pole installation contactor (Installations-Schütz) rated at 25 A with a 230 V AC control coil. It provides two normally ope...

The Hager P012 is a set of universal cover strips for 12-module distribution boards, used to cover unused DIN rail module positions and blanking pl...

The Hager VS312PD is a Golf series surface-mounted distribution board with 3 rows of 12 DIN rail module positions each (36 modules total), rated IP...

The Hager KF84A is a 1-pole connection terminal with fork (spade) connection, designed for secure electrical connections in distribution boards and...

The Hager KDN363A is a 3-pole phase busbar with fork connection, designed to distribute power across multiple circuit breakers within a distributio...

The Hager FWB53S is a universal surface-mounted field distribution board (Feldverteiler) rated at 125 A with IP44 ingress protection, intended for ...

The Hager ESC263 is a Hager ESC modular contactor, 2P, 63 A, 230V AC coil. For switching lighting, heating, and motor loads in distribution boards....

The Hager SBN340 is a 3-pole load break switch (disconnector) rated at 40 A, designed for safe isolation of three-phase AC circuits in DIN rail-mou...

The Hager CD464J is a Hager CD series RCCB, 4P, 63 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager CD240J is a Hager CD series RCCB, 2P, 40 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager CD225J is a Hager CD series RCCB, 2P, 25 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager SVN129 is a DIN rail LED signal module with three indicators - red, green and orange - operating from 230 V AC. It is one module wide and...