WAGO 2004-1201 TOPJOB S 2-Conductor Through Terminal Block 4 mm² 32 A

The WAGO 2004-1201 is a 2-conductor through terminal block from the TOPJOB S series, rated 800 V and 32 A per IEC/EN 60947-7-1. It uses Push-in CAGE CLAMP connection technology actuated by an operating tool, accepting copper conductors from 0.5 to 6 mm², and is certified for Ex e II hazardous-area applications under ATEX and IECEx.

Technical specifications:

• Catalog number: 2004-1201
• Manufacturer: WAGO
• Series: TOPJOB S, 2004
• Type: 2-conductor through terminal block
• Connection technology: Push-in CAGE CLAMP, actuation by operating tool
• Nominal cross-section: 4 mm²
• Solid conductor: 0.5 - 6 mm² / 20 - 10 AWG; push-in: 1.5 - 6 mm² / 14 - 10 AWG
• Fine-stranded conductor: 0.5 - 6 mm² / 20 - 10 AWG; with ferrule push-in: 1.5 - 4 mm² / 18 - 12 AWG
• Strip length: 11 - 13 mm
• Connectable conductor materials: Copper
• Wiring direction: Front-entry
• Rated voltage (IEC/EN 60947-7-1): 800 V, overvoltage category III, pollution degree 3
• Rated impulse withstand voltage: 8 kV
• Rated current (IEC/EN 60947-7-1): 32 A
• Rated voltage (UL 1059 / CSA 22.2 No. 158): 600 V, rated current: 30 A
• Ex approvals: ATEX PTB 05 ATEX 1095 U / IECEx PTB 05.0033U (Ex eb IIC Gb); rated 550 V / 30 A (EN Ex e II)
• Clamping units: 2; potentials: 1; jumper slots: 2
• Mounting: DIN-35 rail (35 × 15 mm and 35 × 7.5 mm)
• Marking: Center and side
• Dimensions (W × H × D): 6.2 × 52.3 × 39.5 mm
• Insulation material: Polyamide (PA66), material group I, UL94 V0
• Operating temperature: -60 to +105 °C continuous; -35 to +85 °C processing
• Power loss per pole: 1.024 W at 32 A; resistance: 0.001 Ω
• Weight: 7 g
• Color: gray
• Standards: IEC/EN 60947-7-1, UL 1059, CSA 22.2 No. 158, DIN EN 50155, DIN EN 61373

Features and benefits:

• Solid and fine-stranded conductors with ferrules insert tool-free via push-in termination, reducing wiring time.
• ATEX and IECEx certified (Ex eb IIC Gb) for use in Ex e II hazardous areas.
• Passed railway vibration and shock testing per DIN EN 61373 (Category 1, Class A/B) and DIN EN 50155 for rolling stock use.
• UL94 V0 rated Polyamide housing with a continuous operating range of -60 to +105 °C.
• Two jumper slots and center/side marking positions support flexible potential distribution and clear circuit identification.

Applications:

• Through-wiring in industrial control panels and distribution boards on DIN-rail.
• Terminal connections in hazardous locations requiring ATEX/IECEx Ex e II certified equipment.
• Electrical wiring in railway rolling stock where DIN EN 50155 and DIN EN 61373 compliance is required.
• Building installation wiring where front-entry push-in terminals with side and center marking are needed.

Also known as: WAGO 2004-1201, WAGO TOPJOB S through terminal block 4 mm².