Svorkovnice a konektory WAGO | Rychlé a spolehlivé zapojení

Montážní nosič, řada 221 - 4 mm², pro montáž na lištu DIN-35 / montáž na šrouby, oranžový. 10 kusů v balení.

Svorkovnice uzemnění se 2 vodiči, s tlačítkem, 2,5 mm², s testovacím portem. Boční a střední značení, pro DIN lištu 35 x 15 a 35 x 7,5. Push-in CAG...

Dvouvodičová průchozí svorkovnice s tlačítkem, 2,5 mm², s testovacím portem. Vhodná pro aplikace Ex i, boční a střední značení. Pro DIN lištu 35 x ...

Dvojitý svorkovnicový blok. Procházející/procházející svorkovnicový blok, L/L, bez nosiče značek. Vhodný pro aplikace Ex e II. Pro DIN lištu 35 x 1...

The WAGO 2587-2147 is a 1-phase, DIN-35 rail-mounted switched-mode power supply that converts 100–240 VAC mains to a regulated 24 VDC SELV output a...

The WAGO 2587-2146 is a single-phase switched-mode power supply for DIN-35 rail mounting, delivering a 24 VDC SELV output at up to 10 A for industr...

The WAGO 2587-2144 is a single-phase, base-type switched-mode power supply for DIN-35 rail mounting. It converts a wide-range 100…240 VAC mains inp...

The WAGO 206-1250 is a manual crimping tool for applying insulated and uninsulated ferrules to conductors with a cross-section of 35 mm² or 50 mm²....

The WAGO 206-1204 Variocrimp 4 is a crimping tool for terminating insulated and uninsulated ferrules across conductor cross-sections from 0.25 to 4...

The WAGO 206-1125 Quickstrip Vario is a Standard wire stripper with integrated wire cutter for preparing solid, fine-stranded, and stranded conduct...

The WAGO 210-721 is a metal operating tool with a partially insulated shaft and a 5.5 x 0.8 mm blade, suited for front-entry terminal blocks. Blade...

The WAGO 210-720 is a metal operating tool with a 3.5 x 0.5 mm blade and a partially insulated shaft, designed for easy operation of front-entry te...

The WAGO 221-500/000-006 is a blue mounting carrier for the 221 Series, designed to hold 2-, 3- and 5-conductor 221 Series Splicing Connectors rate...

The WAGO 750-600 is an end module for WAGO 750 Series fieldbus node assemblies. After the buscoupler and I/O modules are assembled, the end module ...

The WAGO 2204-1307 is a 3-conductor ground terminal block from the 2204 Series, using Push-in CAGE CLAMP® technology with push-button actuation. It...

The WAGO 2010-1207 is a 2-conductor ground terminal block from the 2010 Series, designed for DIN-rail installation and suitable for Ex e II applica...

The WAGO 2003-7646 is a three-level, three-potential multilevel installation terminal block from the 2003 Series, designed for N/L/PE connections i...

The WAGO 2002-433 is an insulated, light grey jumper for TOPJOB S terminal blocks, bridging positions 1 to 3. It carries IEC/EN ratings of 800 V an...

The WAGO 2002-423 is an insulated, light grey continuous jumper bridging positions 1 to 3, designed for commoning adjacent terminal blocks. It enab...

The WAGO 2002-1291 is an end and intermediate plate for TOPJOB S terminal blocks, used to separate or close off terminal block rows. It is 0.8 mm t...

The WAGO 210-133 is a tin-plated copper busbar, 1000 mm long with a 10 mm x 3 mm cross-section, rated for 140 A continuous current. Color-coded whi...

The WAGO 224-114 is a 2-conductor lighting connector from the 224 Series, designed for connecting lights quickly and safely. It combines PUSH WIRE ...

The WAGO 221-425 is a 5-conductor splicing connector with levers from the 221 Series, designed for tool-free, fault-free splicing of all conductor ...

The WAGO 221-423 is a 3-conductor splicing connector with levers from the 221 Series, designed to join solid, stranded, and fine-stranded copper co...