Svorkovnice a konektory WAGO | Rychlé a spolehlivé zapojení

Montážní nosič, řada 221 - 4 mm², pro montáž na lištu DIN-35 / montáž na šrouby, oranžový. 10 kusů v balení.

The WAGO 2587-2146 is a single-phase switched-mode power supply for DIN-35 rail mounting, delivering a 24 VDC SELV output at up to 10 A for industr...

The WAGO 2587-2144 is a single-phase, base-type switched-mode power supply for DIN-35 rail mounting. It converts a wide-range 100…240 VAC mains inp...

The WAGO 206-1204 Variocrimp 4 is a crimping tool for terminating insulated and uninsulated ferrules across conductor cross-sections from 0.25 to 4...

The WAGO 206-1125 Quickstrip Vario is a Standard wire stripper with integrated wire cutter for preparing solid, fine-stranded, and stranded conduct...

The WAGO 210-720 is a metal operating tool with a 3.5 x 0.5 mm blade and a partially insulated shaft, designed for easy operation of front-entry te...

The WAGO 788-312 is a pluggable relay module from the 788 Series, designed for DIN-35 rail mounting in control and interface applications. It accep...

The WAGO 249-119 is a gray group marker carrier designed for use as an additional group marker carrier or continuous marking strip carrier on termi...

The WAGO 2102-5207 is a 2-conductor ground terminal block in the TOPJOB® S 2102 Series, designed for protective earth connections on DIN-rail 35×15...

The WAGO 2102-5204 is a 2-conductor through terminal block from the TOPJOB® S 2102 Series, designed for fast, reliable wire connections in industri...

The WAGO 221-942/000-006 is a 2-way insulated jumper for the 221 Series splicing connectors, designed to extend N and PE (ground) distribution betw...

The WAGO 221-942 is a 2-way insulated jumper for conductor entry in the 221 Series splicing connector family. It plugs into open clamping units wit...

The WAGO 221-941/000-006 is a 2-way insulated blue jumper for conductor entry, used with WAGO 221 Series splicing connectors. It bridges positions ...

The WAGO 2002-408/000-006 is an 8-way insulated push-in type jumper bar in blue from the TOPJOB S 2002 Series, used to common multiple rail-mount t...

The WAGO 2003-7645 is a three-level multilevel installation terminal block from the 2003 Series (TOPJOB S), designed for L/L/PE potential distribut...

The WAGO 2203-7641 is a multilevel installation terminal block from the 2203 Series, designed to streamline wire connections in DIN-rail mounted en...

The WAGO 2016-1392 is an end and intermediate plate for TOPJOB S rail-mount terminal blocks, 1 mm thick in orange. It attaches to DIN rails via sna...

The WAGO 207-1431 is a Gelbox Branch for use with 221 Series splicing connectors up to 6 mm², providing IPX8-rated waterproof protection for conduc...

The WAGO 207-1332 is a branch gelbox from the 207 Series, designed to enclose WAGO 221 and 2x73 Series splicing connectors (not included) and seal ...

The WAGO 2216-7792 is an end and intermediate plate, 1 mm thick, in orange, designed to terminate or divide groups of TOPJOB S rail-mount terminal ...

The WAGO 2202-1611/1000-541 is a 2-conductor fuse terminal block from the 2202 Series, designed to hold a 5 x 20 mm cylindrical miniature metric fu...

The WAGO 2016-7792 is an end and intermediate plate for the TOPJOB S series (Product Group 22), designed to separate or terminate groups of rail-mo...

The WAGO 2016-7607 is a 2-conductor ground terminal block from the TOPJOB S 2016 Series, designed for DIN-35 rail mounting (35 x 15 and 35 x 7.5). ...

The WAGO 2016-1304 is a 3-conductor through rail-mount terminal block from the TOPJOB S 2016 Series, certified for Ex e II and Ex i hazardous-area ...