Svorkovnice a konektory WAGO | Rychlé a spolehlivé zapojení

Světelný konektor, tlačítko na světelné straně. Světelná strana: pro všechny typy vodičů. Strana instalace: pro pevné vodiče, řada 224, max. 2,5 mm...

The WAGO 221-420 is a 10-conductor splicing connector with levers from the 221 Series, designed for inline connection of solid, stranded, and fine-...

The WAGO 221-2401 is a 2-conductor inline splicing connector with levers from the 221 Series, designed to connect solid, stranded, and fine-strande...

The WAGO 210-648 is a short, angled metal operating tool with a partially insulated shaft, designed for actuating front-entry terminal blocks. The ...

The WAGO 2009-305 is a busbar carrier with end stop function and detachable separator plate, designed for mounting on DIN 35 rail. At 7.5 mm wide, ...

The WAGO 2002-403 is a 3-way insulated push-in type jumper bar in the TOPJOB S family, rated at 800 V (III/3) and 25 A. It commons adjacent rail-mo...

The WAGO 2002-1207 is a 2-conductor ground terminal block from the TOPJOB® S 2002 Series, designed for DIN-35 rail mounting with a nominal cross-se...

The WAGO 2203-7641 is a multilevel installation terminal block from the 2203 Series, designed to streamline wire connections in DIN-rail mounted en...

The WAGO 2203-7646 is a multilevel installation terminal block from the 2203 Series, combining neutral, live, and protective earth connections in o...

The WAGO 793-5472 is a pre-printed WMB marker card supplied ready-marked with the standard electrical distribution symbols L1, L2, L3, N, and PE in...

The WAGO 2001-405 is a 5-way insulated push-in type jumper from the TOPJOB S series, used to common adjacent terminals in the 2001 Series rail-moun...

The WAGO 221-625 is a 5-conductor splicing connector with levers from WAGO's 221 Series, connecting solid, stranded, and fine-stranded copper condu...

The WAGO 221-2431 is a 2-conductor inline splicing connector with levers from the 221 Series, designed for tool-free in-line connections of solid, ...

The WAGO 207-1432 is a Size 2 Gelbox Branch housing designed to protect 221 Series splicing connectors carrying cables up to 6 mm² in wet and damp ...

The WAGO 207-1333 is a branch-type Gelbox for cables, designed to enclose WAGO 221 Series and 2x73 Series splicing connectors up to 4 mm² in wet or...

The WAGO 2216-7792 is an end and intermediate plate, 1 mm thick, in orange, designed to terminate or divide groups of TOPJOB S rail-mount terminal ...

The WAGO 2216-7714 is a 1-conductor N-disconnect terminal block from the 2216 Series, built for quick and easy conductor connections on DIN-35 rail...

The WAGO 2216-7604 is a 2-conductor supply terminal block in the TOPJOB S 2216 Series, designed for use in electrical distribution boxes. Push-in C...

The WAGO 2216-7601 is a 2-conductor supply terminal block from the 2216 Series, designed for distribution boxes. It serves as both a through termin...

The WAGO 2202-1611/1000-541 is a 2-conductor fuse terminal block from the 2202 Series, designed to hold a 5 x 20 mm cylindrical miniature metric fu...

The WAGO 2016-7714 is a 1-conductor N-disconnect terminal block from the TOPJOB S 2016 Series, rated 76 A at 250 V per IEC/EN 60947-7-1 (overvoltag...

The WAGO 2016-7604 is a 2-conductor supply terminal block from the TOPJOB S 2016 Series, designed for fault-free electrical installations in distri...

The WAGO 2016-7601 is a 2-conductor supply terminal block from the TOPJOB S 2016 Series, designed for distribution boxes and DIN-rail panel assembl...

The WAGO 2002-409/000-006 is a 9-way insulated push-in type jumper bar in blue for commoning rail-mount terminal blocks in the TOPJOB S 2002 Series...