6ES7132-6BF01-0BA0 Siemens SIMATIC ET 200SP, modul digitálního výstupu, DQ 8

The Siemens 6ES7132-6BF01-0BA0 is a SIMATIC ET 200SP digital output module (DQ 8x24VDC/0.5A ST) providing 8 PNP source outputs at 24 V DC with 0.5 A per channel. It supports module-level diagnostics for short-circuit to L+ and ground, wire break, and supply voltage monitoring. The module fits BaseUnit type A0 and is configurable via STEP 7 TIA Portal from V14 onwards.

Technical specifications:

• MLFB: 6ES7132-6BF01-0BA0
• Manufacturer: Siemens
• Product line: SIMATIC ET 200SP
• Product type designation: DQ 8x24VDC/0.5A ST
• Output type: Source output (PNP, P-switching / current-sourcing)
• Number of outputs: 8
• Rated output voltage: 24 V DC (range: 19.2 - 28.8 V DC)
• Output current per channel: 0.5 A max
• Total output current per module: 4 A max (horizontal, up to 60 °C); 4 A max (vertical, up to 50 °C)
• Short-circuit protection: Electronic, response threshold typ. 1 A (0.7 - 1.3 A)
• Open-circuit detection: Yes
• Output delay (0 to 1): 50 µs max; (1 to 0): 100 µs max
• Switching frequency (resistive load): 100 Hz max
• Lamp load: 5 W max, 10 Hz max
• Cable length: 1000 m shielded, 600 m unshielded
• Compatible BaseUnit: BU type A0, Colour Code CC02
• Isolation: 707 V DC (type test) between channels and backplane bus
• Operating temperature: -30 °C to 60 °C (horizontal); -30 °C to 50 °C (vertical)
• Installation altitude: up to 5000 m
• Dimensions (WxHxD): 15 x 73 x 58 mm
• Weight: approx. 30 g
• TIA Portal support: from V14 (HSP0222) / integrated from V15
• STEP 7 support: from V5.5 SP3 (HSP0230 V7.0) / integrated from V5.6 SP1
• PROFINET: GSDML V2.3
• Address space: 1 byte + 1 byte QI information
• I&M data: I&M0 to I&M3

Features and benefits:

• Module diagnostics for short-circuit to L+, short-circuit to ground, wire break, and supply voltage
• Substitute value output configurable per channel for defined fail-safe states
• Automatic mechanical encoding prevents incorrect module insertion
• Redundant load control supported via parallel switching of two outputs
• Isochronous mode and PWM not required - standard DQ operation for typical automation tasks
• Environmental product declaration available; global warming potential 20.4 kg CO2 eq

Applications:

• Controlling actuators, solenoid valves, and contactors in ET 200SP distributed I/O stations
• Machine automation where per-module short-circuit and wire-break diagnostics are required
• Process control systems using PROFIBUS or PROFINET with PCS 7 from V8.1 SP1
• Lamp load switching up to 5 W in control panel indicator circuits
• Maritime and hazardous-location applications covered by CCC-Ex, NK, CCS, and KR approvals

Certified to IEC 61131 output type 0.5, with approvals including CCC-Ex, FM, NK, CCS, and KR. Part of the Siemens SIMATIC ET 200SP range.

Also known as: Siemens 6ES7132-6BF01-0BA0, SIMATIC ET 200SP DQ 8x24VDC/0.5A ST, ET200SP digital output module 8-channel PNP.