Nástroje

The Wera 7441 (05074701001) is a Kraftform adjustable torque screwdriver from the 7400 series, fitted with a Rapidaptor quick-release chuck for 1/4...

The Wera 6003 Joker (05020208001) is a 17 mm combination wrench with a 7.5° offset open end and double hexagon geometry that doubles placement poss...

The Wera 6003 Joker is a 13 mm combination wrench with a 7.5°-offset open end and double hexagon geometry on both open end and ring sides, enabling...

The Wera 6003 Joker is a 10 mm combination wrench with a total length of 125 mm, designed for confined installation spaces. The 7.5°-offset open en...

The Wera 6000 Joker (05073268001) is an 8 mm ratcheting combination wrench featuring an open jaw on one end and a ring ratchet on the other. The op...

The Wera 6003 Joker (05020506001) is a 32 mm combination wrench with a 360 mm overall length. A 7.5° offset open end combined with double hexagon g...

The Wera 6003 Joker (05020500001) is a combination wrench, 20 x 230 mm, with a 7.5° offset open end and double hexagon geometry on both the open en...

The Wera 6003 Joker (05020199001) is a 7 mm combination wrench 110 mm in length with a 7.5° offset open end and double hexagon geometry on both ope...

The Wera 8007 B VDE Zyklop ratchet (article 05004966001) is an individually tested insulated 3/8" drive ratchet rated for safe working up to 1,000 ...

Wera 2067 TORX HF screwdriver for electronic and precision engineering applications. TX 10 drive with chrome-plated holding function that retains T...

Kraftform Micro TORX® HF screwdriver in the 2067 series for precision electronics and mechanical assembly. The holding function uses clamping force...

The Wera 2067 TORX® HF (05118183001) is a Kraftform Micro screwdriver with a chrome-plated holding function for TORX® recessed screws, TX 7 profile...

Wera 2067 TORX® HF Kraftform Micro screwdriver with holding function for recessed TORX® screws, designed for electronic, electrical, and precision ...

The Wera 2067 TORX® HF (05118180001) is a Kraftform Micro screwdriver with chrome-plated holding function for TX 4 TORX® screws, intended for elect...

The Wera 897/4 Impaktor (05057675001) is a stainless steel 1/4" bit holder with retaining ring and magnet, designed to absorb extreme impulse peaks...

The Wera 889/4/1 K Rapidaptor Universal Bit Holder accepts bits with a 1/4" external hexagon drive (DIN ISO 1173-C 6.3 and E 6.3) and mounts to mac...

The Wera 05057435001 Bit-Check 12 Wood TX HF 1 is a 12-piece 1/4" hex drive bit and holder set designed for woodworking applications. The 867/1 TOR...

Wera 899/4/1 universal bit holder accepts bits with 1/4" external hexagon drive to DIN ISO 1173-C 6.3. The stainless steel sleeve, retaining ring, ...

The Wera 338 is an actuation tool for opening tension spring cage terminals, including those in confined spaces such as distribution boxes and swit...

The Phoenix Contact CRIMPFOX CENTRUS 6S-NC (1202882) is a crimping tool for uninsulated and insulated ferrules to DIN 46228 Part 1 and 4, covering ...

The Knipex 12 49 21 is a replacement blade pair designed to restore full cutting and stripping performance to the Knipex MultiStrip 10 automatic wi...

The Knipex 97 53 18 Twistor16 is a self-adjusting crimping pliers for wire end ferrules, covering a wide capacity range of 0.14 to 16 mm² without a...

The Knipex 97 53 08 is a self-adjusting crimping plier designed for crimping wire end ferrules (bootlace ferrules) to DIN 46228 Part 1 and Part 4. ...

The Knipex 10 98 I220 is a 220 mm ear clamp pliers designed for the fast and reliable installation of single-ear and double-ear clamps (Oetiker sys...