Napájení a konektory

The WAGO 2010-1207 is a 2-conductor ground terminal block from the 2010 Series, designed for DIN-rail installation and suitable for Ex e II applica...

The WAGO 2003-7646 is a three-level, three-potential multilevel installation terminal block from the 2003 Series, designed for N/L/PE connections i...

The WAGO 2002-433 is an insulated, light grey jumper for TOPJOB S terminal blocks, bridging positions 1 to 3. It carries IEC/EN ratings of 800 V an...

The WAGO 2002-423 is an insulated, light grey continuous jumper bridging positions 1 to 3, designed for commoning adjacent terminal blocks. It enab...

The WAGO 2002-1291 is an end and intermediate plate for TOPJOB S terminal blocks, used to separate or close off terminal block rows. It is 0.8 mm t...

The WAGO 2002-3201 is a triple-deck through terminal block from the TOPJOB S 2002 Series, providing three independent L/L/L potentials in a single ...

The WAGO 782-604 is a 2-conductor through terminal block from the 782 Series, rated 1000 V and 41 A per IEC/EN 60947-7-1, and suitable for Ex i (in...

The WAGO 2000-1201 is a 2-conductor through terminal block from the TOPJOB S 2000 Series, using Push-in CAGE CLAMP technology for tool-free inserti...

The WAGO 2003-7645 is a three-level multilevel installation terminal block from the 2003 Series (TOPJOB S), designed for L/L/PE potential distribut...

The WAGO 2204-1207 is a 2-conductor ground terminal block from the TOPJOB S 2204 Series, designed to connect and ground copper conductors from 0.5 ...

The WAGO 2001-434 is an insulated light gray jumper from the TOPJOB S product group (Product Group 22), designed to bridge positions 1 to 4 on TOPJ...

The WAGO 2002-400 is an insulated 2-way continuous jumper from the TOPJOB S series, designed to readily connect an endless number of adjacent termi...

The WAGO 2003-7692 is an end and intermediate plate for TOPJOB S rail-mount terminal blocks, 0.8 mm thick and orange in color. It installs via snap...

The WAGO 2102-5204 is a 2-conductor through terminal block from the TOPJOB® S 2102 Series, designed for fast, reliable wire connections in industri...

The WAGO 207-1331 is a Size 1 Gelbox branch from the 207 Series, designed to enclose and seal cable splices made with WAGO 221 Series and 2x73 Seri...

The WAGO 2016-1301 is a 3-conductor through terminal block in the TOPJOB S 2016 Series, rated 76 A at 800 V AC per IEC/EN 60947-7-1 and certified E...

The WAGO 2002-404/000-006 is a 4-way insulated push-in type jumper bar in blue, designed for commoning adjacent terminal blocks in the 2002 Series....

The WAGO 221-941/000-006 is a 2-way insulated blue jumper for conductor entry, used with WAGO 221 Series splicing connectors. It bridges positions ...

The WAGO 2002-406 is a 6-way insulated push-in type jumper bar from the TOPJOB S product group, designed to common multiple terminal positions acro...

The WAGO 2002-407/000-005 is a 7-way insulated push-in type jumper bar for the 2002 Series, rated at 800 V (III/3) and 25 A, designed to commone up...

The WAGO 281-322 is a separator plate for the 281 Series rail mounted terminal blocks, 2 mm thick and oversized, supplied in orange. Dimensioned at...

The WAGO 221-422 is a 2-conductor splicing connector with levers from the 221 Series, enabling tool-free connection of solid, stranded, and fine-st...

The WAGO 249-117 is a screwless end stop, 10 mm wide, designed to secure rail-mount terminal blocks against movement on DIN-35 rails per DIN EN 607...

The WAGO 2004-1201 is a 2-conductor through terminal block from the TOPJOB S series, rated 800 V and 32 A per IEC/EN 60947-7-1. It uses Push-in CAG...