Skladem

The Hager SF463 is a 4-pole 63A changeover switch with I-0-II switching positions (source 1 - off - source 2), rated at 230/400V. Used for manual c...

The Hager VF418PD is a Golf series flush-mounted distribution board with 4 rows of 18 DIN rail module positions each (72 modules total), rated IP40...

The Hager ESC463 is a 4-pole installation contactor rated at 63 A with a 230V AC coil, designed for switching resistive and slightly inductive load...

The Hager KDN163A is a 1-pole phase busbar with fork connection, designed to distribute single-phase power across up to 12 module positions within ...

The Hager SFT440 is a 4-pole 40A modular changeover switch with centre-off position for DIN rail mounting. It simultaneously switches three-phase p...

The Hager SFT140 is a 1-pole modular changeover switch with a top common point and three switching positions (I-0-II), designed for controlled swit...

The Hager CD464J is a Hager CD series RCCB, 4P, 63 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager ESC440 is a 4-pole installation contactor rated at 40 A with a 230 V AC control coil. It carries four normally open (NO) contacts and a r...

The Hager CD426J is a Hager CD series RCCB, 4P, 25 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager VU60NC is a flush-mount small distribution board (Kleinverteiler, Unterputz) offering 60-module capacity across 5 rows, rated at 63 A and...

The Hager MB116A is a Hager MB1 miniature circuit breaker, 1P, 16 A, B curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical ...

The Hager KC325 is a 3-pole connection bridge with pin connection for phase conductors, spanning 125 mm, for use in distribution boards and modular...

The Hager ESC226 is a 25 A installation contactor with a 2NC (2 normally closed) contact configuration, designed for DIN rail mounting in residenti...

The Hager SBN125 is a 1-pole load break switch (disconnector) rated at 25 A and 230 V AC, designed for DIN rail installation in electrical distribu...

The Hager KZN021 is an end cap for 1-pole busbars, used to cover exposed live conductor ends and maintain IP protection inside Hager distribution b...

The Hager ESC225 is a 2-pole installation contactor (Installations-Schütz) rated at 25 A with a 230 V AC control coil. It provides two normally ope...

The Hager FWB32S is a 72-module surface-mounted field distribution board rated at 125 A, designed for universal electrical installation. It carries...

The Hager FWB72S is a universal surface-mounted field distribution board with 168 module positions, rated at 125 A and IP44. Designed for indoor in...

The Hager CD240J is a Hager CD series RCCB, 2P, 40 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager SBN363 is a 3-pole load break switch (disconnector) rated at 63 A, designed for safe isolation of electrical circuits on 400 V AC systems...

The Hager P012 is a set of universal cover strips for 12-module distribution boards, used to cover unused DIN rail module positions and blanking pl...

The Hager MC316A is a Hager miniature circuit breaker, 3P, 16 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager ESC325 is a 3-pole installation contactor rated at 25A, with 3 normally open contacts and a 230V AC control voltage. It is designed for D...

The Hager VU24NWB is a 2-row, 24-module flush-mount distribution board from the Volta range, designed for indoor residential and light commercial e...