Hager rozvodné desky, sběrnice a elektrické komponenty

The Hager VH36NC is a Volta series small distribution board for cavity wall mounting, rated at 400 V and 63 A. It provides 36 module spaces across ...

The Hager VH24NC is a 24-module small distribution board (Kleinverteiler) from the Volta range, designed for cavity wall (hollow wall) mounting. Ra...

The Hager VH12NC is a 1-row, 12-module cavity wall distribution board from the Volta range, designed for flush mounting in hollow wall construction...

The Hager SFT125 is a 1-pole 25A modular changeover switch with top common point for DIN rail mounting. It provides I-0-II manual changeover betwee...

The Hager KZN023 is an end cap for 2-pole and 3-pole busbars, used to cover exposed live conductor ends and maintain IP protection inside Hager dis...

The Hager KF84A is a 1-pole connection terminal with fork (spade) connection, designed for secure electrical connections in distribution boards and...

The Hager KDN380B is a 3-pole phase busbar with fork connection, designed to distribute current across three phases within distribution board insta...

The Hager KDN363A is a 3-pole phase busbar with fork connection, designed to distribute power across multiple circuit breakers within a distributio...

The Hager KDN180A is a 1-pole phase busbar with fork connection, designed to distribute single-phase power across 12 module positions in consumer u...

The Hager FWU61S is a 72-module flush-mounted field distribution board (Feldverteiler UP) designed for recessed hollow wall installation. Rated at ...

The Hager FWU31S is a 36-module, 125 A flush-mount distribution board for hollow wall installation, with niche dimensions of 507 x 315 x 115 mm. Ho...

The Hager FWB31S is a Hager FWB distribution board, 36 module capacity, IP44, surface-mounted. For DIN rail circuit breaker installation in domesti...

The Hager ESC340 is a 3-pole installation contactor (Installationsschütz) rated at 40 A with a 230 V AC control coil, intended for switching resist...

The Hager ESC125 is a 25 A single-pole installation contactor with 1 normally open (NO) contact, designed for AC control circuits at 230 V. It fits...

The Hager SBN399 is a Hager SBN modular load break switch, 3P, 125 A. For manual isolation and switching of circuits in distribution boards. Mounts...

The Hager SBN390 is a 3-pole 100 A load break switch (disconnector) for DIN rail mounting, rated at 400 V AC. It provides circuit isolation and loa...

The Hager SBN380 is a 3-pole load break switch (disconnector) rated at 80 A and 400 V AC, intended for DIN rail installation in electrical distribu...

The Hager SBN332 is a Hager SBN modular load break switch, 3P, 32 A. For manual isolation and switching of circuits in distribution boards. Mounts ...

The Hager SBN316 is a 3-pole load break switch rated at 16 A and 400 V AC for DIN rail installation in modular distribution systems. It provides si...

The Hager CD441J is a Hager CD series RCCB, 4P, 40 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager CD425J is a Hager CD series RCCB, 4P, 25 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager CD225J is a Hager CD series RCCB, 2P, 25 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager HLF390S is a Hager HLF miniature circuit breaker, 3P, 100 A, C curve, 10kA. For final circuit protection. Mounts on 35mm DIN rail.Technic...

The Hager HLF380S is a Hager HLF miniature circuit breaker, 3P, 80 A, C curve, 10kA. For final circuit protection. Mounts on 35mm DIN rail.Technica...