Hager rozvodné desky, sběrnice a elektrické komponenty

The Hager SFT125 is a 1-pole 25A modular changeover switch with top common point for DIN rail mounting. It provides I-0-II manual changeover betwee...

The Hager KZ059 is a touch protection cover end piece (Berührungsschutzabdeckung Endstück) designed as a busbar accessory for distribution boards a...

The Hager FWB72S is a universal surface-mounted field distribution board with 168 module positions, rated at 125 A and IP44. Designed for indoor in...

The Hager ESC440 is a 4-pole installation contactor rated at 40 A with a 230 V AC control coil. It carries four normally open (NO) contacts and a r...

The Hager SBN125 is a 1-pole load break switch (disconnector) rated at 25 A and 230 V AC, designed for DIN rail installation in electrical distribu...

The Hager CD440J is a Hager CD series RCCB, 4P, 40 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager CD426J is a Hager CD series RCCB, 4P, 25 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager MB110A is a Hager MB1 miniature circuit breaker, 1P, 10 A, B curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical ...

The Hager MC102A is a Hager miniature circuit breaker, 1P, 2 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spec...

The Hager KC325 is a 3-pole connection bridge with pin connection for phase conductors, spanning 125 mm, for use in distribution boards and modular...

The Hager VU36NWB is a 36-module, 3-row flush-mount distribution board from the Volta range, rated at 400 V and 63 A. Designed for Unterputz (flush...

The Hager VU24NWB is a 2-row, 24-module flush-mount distribution board from the Volta range, designed for indoor residential and light commercial e...

The Hager JP002 is a blanking cover strip for univers distribution boards, covering 24 unused modules in a row. It closes off the space left by unf...

The Hager VA24CN is a 2-row, 24-module small distribution board from the Volta range, designed for surface-mount installation in residential and li...

The Hager MBN125 is a 1-pole miniature circuit breaker with B trip characteristic, rated at 25A for use in 230-400V AC systems. It delivers a break...

The Hager VS412PD is a Golf series surface-mounted distribution board with 4 rows of 12 DIN rail module positions each (48 modules total), rated IP...

The Hager VS212PD is a Golf series surface-mounted distribution board with 2 rows of 12 DIN rail module positions each (24 modules total), rated IP...

The Hager VS112PD is a Golf series surface-mounted distribution board with 1 row of 12 DIN rail module positions, rated IP40. Supplied with pre-wir...

The Hager VS104PD is a Golf series surface-mounted distribution board with 1 row of 4 DIN rail module positions, rated IP40. Supplied with pre-wire...

The Hager KZN021 is an end cap for 1-pole busbars, used to cover exposed live conductor ends and maintain IP protection inside Hager distribution b...

The Hager FWU42S is a 96-module flush-mounted field distribution board (Feldverteiler UP) rated at 125 A, designed for concealed installation in ho...

The Hager FWU33S is a flush-mounted field distribution board (Feldverteiler UP) with 108-module capacity across 3 rows, rated at 125 A with IP30 pr...

The Hager FWB64S is a universal surface-mounted field distribution board (Feldverteiler Aufputz) with IP44 protection and Protection Class II, rate...

The Hager FWB43S is a 144-module universal surface-mounted distribution board (Feldverteiler AP) rated IP44 and Protection Class II, with a 125 A r...