2002-1204 Wago 2žilový průchozí svorkovnicový blok

The WAGO 2002-1204 is a 2-conductor through terminal block from the TOPJOB® S 2002 Series, rated 24 A / 800 V per IEC/EN 60947-7-1 and approved for Ex e II and Ex i hazardous-area applications. It uses Push-in CAGE CLAMP® technology with front-entry wiring, accepting solid and fine-stranded conductors from 0.25 mm² to 4 mm²; solid conductors and fine-stranded conductors with ferrules insert directly without tools.

Technical specifications:

• Catalog number: 2002-1204
• Manufacturer: WAGO
• Series: TOPJOB® S 2002
• Type: 2-conductor through terminal block
• Connection technology: Push-in CAGE CLAMP®
• Actuation type: Operating tool
• Nominal cross-section: 2.5 mm²
• Solid conductor range: 0.25 - 4 mm² / 22 - 12 AWG
• Fine-stranded conductor range: 0.25 - 4 mm² / 22 - 12 AWG
• Fine-stranded with insulated ferrule: 0.25 - 2.5 mm² / 22 - 14 AWG
• Strip length: 10 - 12 mm / 0.39 - 0.47 in
• Rated current (IEC/EN 60947-7-1): 24 A
• Nominal voltage (IEC/EN 60947-7-1): 800 V
• Rated impulse withstand voltage: 8 kV
• Rated current / voltage (UL 1059, CSA 22.2 No. 158): 20 A / 600 V
• Ex approval: ATEX PTB 03 ATEX 1162 U / IECEx PTB 03.0004U (Ex eb IIC Gb); 550 V / 22 A
• Clamping units: 2; jumper slots: 2
• Dimensions (W × H × D): 5.2 × 48.5 × 39.5 mm
• Mounting: DIN-35 rail (35 × 15 and 35 × 7.5)
• Marking: Center and side marking
• Color: Blue
• Insulation material: Polyamide (PA66), UL94 V0
• Weight: 5 g
• Processing temperature: -35 to +85 °C
• Continuous operating temperature: -60 to +105 °C
• Standards: IEC/EN 60947-7-1, UL 1059, CSA 22.2 No. 158, DIN EN 50155

Features and benefits:

• Push-in CAGE CLAMP® allows solid conductors and fine-stranded conductors with ferrules to be inserted directly without tools, speeding up wiring.
• Dual ATEX and IECEx approval (Ex eb IIC Gb) for use in Ex e II increased-safety and Ex i intrinsic-safety hazardous zones.
• Center and side marking positions support clear circuit identification without additional hardware.
• Tested to DIN EN 50155 and DIN EN 61373 for railway rolling stock vibration and shock requirements.
• UL94 V0 polyamide housing rated for continuous operation from -60 to +105 °C.

Applications:

• Through-wiring in ATEX/IECEx-certified Ex e II or Ex i control panels and junction boxes.
• DIN-rail terminal assemblies in industrial control cabinets requiring fast, front-entry conductor connection.
• Building installation distribution boards where labeled, organized terminal rows are needed.
• Railway rolling stock electrical equipment subject to DIN EN 50155 environmental requirements.

Also known as: WAGO 2002-1204, WAGO TOPJOB S 2002 through terminal block blue.