Ochrana obvodů

The Hager SF463 is a 4-pole 63A changeover switch with I-0-II switching positions (source 1 - off - source 2), rated at 230/400V. Used for manual c...

The Hager SFT240 is a 2-pole modular changeover switch with a top common point and three switching positions (I-0-II), designed for controlled swit...

The Hager SFT440 is a 4-pole 40A modular changeover switch with centre-off position for DIN rail mounting. It simultaneously switches three-phase p...

The Hager CD464J is a Hager CD series RCCB, 4P, 63 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager SFT140 is a 1-pole modular changeover switch with a top common point and three switching positions (I-0-II), designed for controlled swit...

The Hager KC325 is a 3-pole connection bridge with pin connection for phase conductors, spanning 125 mm, for use in distribution boards and modular...

The Hager CD426J is a Hager CD series RCCB, 4P, 25 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager MB116A is a Hager MB1 miniature circuit breaker, 1P, 16 A, B curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical ...

The Hager KF83A is a 1-pole connection terminal with pin (prong) connection, suitable for conductor cross-sections up to 35 mm² on rigid cables and...

The Hager CD240J is a Hager CD series RCCB, 2P, 40 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager SBN125 is a 1-pole load break switch (disconnector) rated at 25 A and 230 V AC, designed for DIN rail installation in electrical distribu...

The Hager CD241J is a Hager CD series RCCB, 2P, 40 A, 30mA, Type AC. For earth leakage protection in domestic and commercial distribution boards. M...

The Hager MC102A is a Hager miniature circuit breaker, 1P, 2 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spec...

The Hager SBN363 is a 3-pole load break switch (disconnector) rated at 63 A, designed for safe isolation of electrical circuits on 400 V AC systems...

The Hager KZN021 is an end cap for 1-pole busbars, used to cover exposed live conductor ends and maintain IP protection inside Hager distribution b...

The Hager ESC325 is a 3-pole installation contactor rated at 25A, with 3 normally open contacts and a 230V AC control voltage. It is designed for D...

The Hager ESC226 is a 25 A installation contactor with a 2NC (2 normally closed) contact configuration, designed for DIN rail mounting in residenti...

The Hager CD440J is a Hager CD series RCCB, 4P, 40 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Hager P012 is a set of universal cover strips for 12-module distribution boards, used to cover unused DIN rail module positions and blanking pl...

The Hager KDN380A is a 3-pole phase busbar with fork connection, designed to distribute power simultaneously across circuit breakers and modular de...

The Hager MC110A is a Hager miniature circuit breaker, 1P, 10 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager SBN340 is a 3-pole load break switch (disconnector) rated at 40 A, designed for safe isolation of three-phase AC circuits in DIN rail-mou...

The Hager SBN325 is a 3-pole load break switch (Ausschalter) rated at 25 A and 400 V AC, designed for DIN rail mounting in distribution boards and ...

The Hager MC316A is a Hager miniature circuit breaker, 3P, 16 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...