Komponenty pro automatizační řízení

The Giovenzana 11706006 is a 4-lobe protective guard for 22mm mushroom head push buttons. The lobe surround prevents accidental side-contact actuat...

The Giovenzana FFH006 is a rotary angular limit switch for crane and hoist end-of-travel control, operating over a 90-degree rotation range with 4 ...

The Giovenzana FGR101004F is the flanged mounting version of the FGR101004 rotary gear limit switch, from the FGR1 series with a 1:100 gear reducti...

The Giovenzana FCT2L01Z11D is a 30mm thermoplastic limit switch with a roller lever actuator, 1NC+1NO snap-action contacts, and a 2-metre pre-wired...

The Giovenzana FTN198Z11 is a thermoplastic rope pull limit switch with a rope pull lever actuator and 1NO+1NC snap action contacts (Zb), rated IP6...

The Giovenzana FTN1R37Z11 is a thermoplastic limit switch with a rod lever actuator and 1NO+1NC snap action contacts (Zb), rated IP67. Manual reset...

The Giovenzana FTN1R33Z11 is a thermoplastic limit switch with a one-way roller arm lever actuator and 1NO+1NC snap action contacts (Zb), rated IP6...

The Giovenzana FTN140LX11 is a thermoplastic limit switch with a ø50 long rubber roller lever with variable length actuator and 1NO+1NC slow action...

The Giovenzana FTN140LZ11 is a thermoplastic limit switch with a ø50 long rubber roller lever with variable length actuator and 1NO+1NC snap action...

The Giovenzana FTN135X11 is a thermoplastic limit switch with a spring lever with tip in PA actuator and 1NO+1NC slow action contacts (Zb), rated I...

The Giovenzana FTN131Z11 is a thermoplastic limit switch with a plastic end plunger with protective boot actuator and 1NO+1NC snap action contacts ...

The Giovenzana FTN131X11 is a thermoplastic limit switch with a plastic end plunger with protective boot actuator and 1NO+1NC slow action contacts ...

The Giovenzana MFI.1 is a snap-action microswitch with a long roller lever actuator and NC+NO contacts. It is used as the internal switching elemen...

Tento modulární černý volič Harmony XB4 má 3 polohy a funguje s mechanismem pružinového návratu do středu. Má kovový rámeček. Tento volič poskytuje...

Tato prázdná ovládací stanice Harmony XALD má 3 výřezy pro 3 tlačítka / 3 funkce pro ovládání provozu strojů. Tato tmavě šedá prázdná ovládací stan...

Energetické měřiče řady Acti9 iEM2100 jsou jednofázové měřiče energie určené pro montáž na DIN lištu a základní měření spotřeby. Tato produktová řa...

Tento monolitický černý volič Harmony XB7 má 3 polohy, funguje s mechanismem pružinového návratu do středu a má šroubové svorky. Snadno se instaluj...

Dvojitý ovládací tlačítko, RMQ-Titan, Ovladače a signalizační světla nevýrazné, momentální, bílá čočka, zelená, červená, popsané, rámeček: titan, S...

The Eaton M22-XAMP is a pulsed-tone buzzer accessory for the Eaton Moeller M22 series pushbutton and signalling system. It operates at 24 V DC (+10...

The Eaton M22-FI1 is a single-location flat surface mounting enclosure from the Moeller series M22, accepting one 22.5 mm control component in a co...

The Eaton M22G-XGPV is a Moeller series M22 guard ring, classed as a mechanical accessory of the protective collar type for M22 series control devi...

The M22-DRL-Y is a flush-mounted maintained illuminated pushbutton actuator from Eaton's RMQ-Titan series, designed for a 22.5 mm panel cutout with...

The Eaton M22-DRL-R is a flush, maintained illuminated pushbutton actuator from the RMQ-Titan M22 series, featuring a red blank flat-face actuator ...

3 polohy Ø22,5 mm, udržovaná, osvětlená, modrá.