Všechny produkty

The Phoenix Contact SK 20 is a shield connection clamp for grounding cable shields directly on busbars, with a contact resistance of less than 1 mΩ...

The Phoenix Contact SK 14 is a shield connection clamp designed to terminate cable shields directly onto busbars, delivering a contact resistance o...

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...

The Phoenix Contact REL-MR- 24DC/21 is a plug-in miniature power relay with 1 changeover contact and a 24 V DC coil input, designed for switching l...

The Phoenix Contact UNO-PS/1AC/24DC/30W is a primary-switched DIN rail power supply from the UNO POWER family, delivering 24V DC at 1.25A (30W) fro...

The Phoenix Contact PLC-RPT- 24UC/21 is a plug-in relay module from the PLC-INTERFACE series for NS 35/7.5 DIN rail, combining a Push-in terminal b...

The Phoenix Contact UKK 3 is a double-level terminal block that routes two independent circuits within a compact 5.2 mm wide body. Rated at 500 V a...

The Phoenix Contact PSM-STRIP-FC/PROFIB is a dedicated quick stripping tool for PROFIBUS Fast Connect bus cable, performing multi-stage stripping i...

The Phoenix Contact SF-CCK 9 is a universal metal control cabinet key engineered to fit all common enclosure closures in a single tool. It covers a...

The Phoenix Contact MICROFOX-S ESD (catalog number 1212480) is an ESD electronic diagonal cutter designed for precise wire and lead cutting in elec...

The Phoenix Contact CUTFOX-CD is a cable duct cutter designed for cutting plastic cable ducts, covers, and profiles with clean, burr-free results. ...

The Phoenix Contact WIREFOX-D CX-4 is a precision 2-stage stripping tool designed for coaxial cables with an external diameter of Ø 2.5 to 7.6 mm. ...

The Phoenix Contact SF-LTX SET is a 9-piece Torx offset screwdriver set covering sizes TX 8 through TX 40, designed for tightening and loosening To...

The UCT-WMCO 3,5 (23X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent identification of co...

The UCT-WMCO 3,5 (12X4) is a clip-on conductor marker sheet from Phoenix Contact, designed for the subsequent labeling of wires with an external di...

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The Phoenix Contact E/NS 35 N is a gray polyamide end bracket designed to secure and terminate terminal block assemblies on NS 35/7.5 and NS 35/15 ...

The Phoenix Contact NLS-CU 3/10 SN 1000MM is a copper neutral busbar with a 3 mm x 10 mm cross-section and a length of 1000 mm, rated for a nominal...

The Phoenix Contact UK 5-HESILED 24 (catalog number 3004126) is a single-position fuse modular terminal block rated at 6.3 A and 24 V, accepting G-...

The Phoenix Contact SZS 0,4X2,0 is a precision micro screwdriver with a bladed tip measuring 0.4 mm thick by 2.0 mm wide and a 60 mm blade length, ...

The Legrand 664850 is a Niloé single TV socket with Type F (shielded star) connector, finished in Linen. It is rated IP21 with attenuation of 1 dB ...

The Legrand 038395 is a CAB 3 marker dispenser/loader for the 0.5 to 1.5 mm² marker range. It is made of Red plastic, 173 mm long, and is designed ...

The Legrand 022512 is a Vistop 3-pole isolating switch rated 63 A, providing visible on-load isolation for industrial and tertiary distribution. It...

Cena za 100 m