Power and Connectors

The Phoenix Contact PTTB 2,5 is a double-level push-in terminal block that integrates two independent circuits in a single 5.2 mm wide unit, rated ...

The Phoenix Contact PTTB 1,5/S is a double-level push-in terminal block rated at 500 V and 16 A, designed to integrate two independent circuits int...

The PTFIX 6/18X2,5 GY is a Phoenix Contact distributor terminal block for power distribution from a single 6 mm² supply line to up to 18 load circu...

The Phoenix Contact PTFIX 6/18X2,5-NS35 BU is a distributor terminal block with integrated supply, providing 19 push-in connections rated at 690 V ...

The Phoenix Contact CLIPFIX 35 (catalog number 3022218) is a quick-mounting end bracket for securing terminal block assemblies on NS 35/7.5 or NS 3...

The Schneider Electric LGYT1E24 is a Linergy earth terminal block with 24 connection points, combining screw and screwless (push-in) terminals for ...

The Phoenix Contact PTFIX 6/18X2,5 GNYE is a single-row distributor terminal block for power distribution without protective conductor function. It...

The Phoenix Contact NLS-CU 3/10 SN 1000MM is a copper neutral busbar with a 3 mm x 10 mm cross-section and a length of 1000 mm, rated for a nominal...

The Phoenix Contact D-ST 4 (catalog number 3030420) is a gray end cover designed to close off terminal block assemblies, providing a clean and safe...

The Weidmuller WAP 2,5-10 is a WAP W-Series end plate, Beige. Closes off the end of a W-Series terminal block assembly on DIN rail.Technical specif...

The Weidmuller 1061200000 WEW 35/2 is an end bracket for W-series terminal block groups, providing a mechanical end stop and preventing lateral mov...

The ZB 8,LGS:FORTL.ZAHLEN 1-10 is a Phoenix Contact Zack marker strip designed for labeling terminal blocks with an 8.2 mm pitch. Pre-printed horiz...

The Phoenix Contact FBS 10-3,5 is a plug-in bridge designed to parallel connect multiple terminal blocks within the CLIPLINE complete system. With ...

The Phoenix Contact PT 2,5-TWIN is a feed-through terminal block that connects three conductors in a single 5.2 mm wide unit, rated 800 V and 24 A ...

The Phoenix Contact PTIO 1,5/S/3 is an initiator/actuator terminal block for sensor and actuator wiring in control panels and automation systems. P...

The Phoenix Contact AB/SS-M is a support bracket designed to secure 3 x 10 mm busbars in panel assemblies, providing direct contact to the mounting...

The Phoenix Contact PT 4-HESI (5X20) is a fuse modular terminal block for G 5x20 glass or ceramic fuses, rated 500 V and 6.3 A. Its tool-free push-...

The Phoenix Contact KLM 3 (catalog number 0811969) is a terminal strip marker carrier with infinitely adjustable labeling area height, engineered s...

The FBS 2-5 is a 2-position plug-in bridge from Phoenix Contact, designed to electrically connect adjacent terminal blocks in the CLIPLINE complete...

The WAGO 210-722 is a set of three operating tools with partially insulated metal shafts, supplied in a box. Suitable for use with terminal block a...

The Phoenix Contact E/NS 35 N is a gray polyamide end bracket designed to secure and terminate terminal block assemblies on NS 35/7.5 and NS 35/15 ...

The Phoenix Contact PT 6-PE is a protective conductor terminal block for grounding and earthing connections on NS 35/7.5 and NS 35/15 DIN rails. It...

The Circutor CLZ-FP-44/25-HD (code R2H54L) is a three-phase tubular power capacitor from the Heavy Duty (HD) range, rated at 20 kvar at 400 V and 2...

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...