WAGO 2216-1304 3-Conductor Through Terminal Block 16 mm² 76 A Blue

The WAGO 2216-1304 is a 3-conductor through terminal block from the TOPJOB S 2216 Series, designed for quickly and securely connecting electrical conductors in industrial and building installations. It features Push-in CAGE CLAMP technology with push-button actuation, accepting solid and fine-stranded conductors from 0.5 to 16 mm² without tools or crimping. Rated at 76 A and 800 V AC (IEC/EN 60947-7-1, OVC III), it includes a test port and is certified for Ex i intrinsically safe applications.

Technical specifications:

• Catalog number: 2216-1304
• Manufacturer: WAGO
• Series: TOPJOB S, 2216 Series
• Type: 3-conductor through terminal block with test port
• Connection technology: Push-in CAGE CLAMP, push-button actuation
• Clamping units: 3; jumper slots: 2
• Nominal cross-section: 16 mm²
• Solid conductor: 0.5 - 16 mm² / 20 - 6 AWG
• Fine-stranded conductor: 0.5 - 25 mm² / 20 - 4 AWG
• Fine-stranded with insulated ferrule: 0.5 - 16 mm² / 20 - 6 AWG
• Strip length: 18 - 20 mm
• Rated current (IEC/EN 60947-7-1): 76 A; rated voltage: 800 V AC (OVC III, pollution degree 3)
• Rated current (UL 1059 / CSA 22.2 No 158): 85 A at 600 V
• Rated impulse withstand voltage: 8 kV
• Ex rating: ATEX PTB 18 ATEX 1009 U / IECEx PTB 18.0016U (Ex eb IIC Gb); 550 V, 76 A
• Dimensions (W x H x D): 12 x 91.8 x 43.7 mm
• Weight: 32.1 g
• Mounting: DIN-35 rail (35 x 15 mm and 35 x 7.5 mm)
• Insulation: Polyamide (PA66), flammability class UL 94 V0
• Color: blue; actuator color: orange
• Processing temperature: -35 to +85 °C; continuous operating temperature: -60 to +105 °C
• Standards: IEC/EN 60947-7-1, UL 1059, CSA 22.2 No 158, DIN EN 50155

Features and benefits:

• Push-in CAGE CLAMP accepts solid and fine-stranded conductors with ferrules directly without tools or additional preparation.
• Integrated test port enables in-circuit measurement without disturbing live wiring.
• Certified for ATEX and IECEx Ex i and Ex e II applications (Ex eb IIC Gb), suitable for hazardous area installations.
• Front-entry wiring with center and side marking positions supports flexible circuit identification.
• Tested to DIN EN 50155 for railway rolling stock electronics and vibration/shock tested to DIN EN 61373 Category 1, Class A/B.

Applications:

• Through-wiring and potential distribution in industrial control panels and building installation cabinets.
• Intrinsically safe (Ex i) circuits in hazardous area zone installations requiring ATEX or IECEx compliance.
• Railway rolling stock wiring where DIN EN 50155 approval is required.
• Any DIN-rail enclosure where in-circuit testing via test port is needed without disconnecting conductors.

Also known as: WAGO 2216-1304, WAGO TOPJOB S 16 mm² blue push-in through terminal block.