Telemecanique XSAV12373EX ATEX Dust Rotation Monitor Sensor M30 PNP NC 2m Cable
Free Shipping
Get free shipping on orders exceeding €300!
The Telemecanique XSAV12373EX is an XSA inductive rotation monitoring sensor for hazardous areas with combustible dust (ATEX zones 21 and 22), in an M30 x 1.5 nickel plated brass body. It has a nominal sensing distance of 10 mm, an adjustable frequency range of 120 to 3000 cycles per minute, a 3-wire PNP output with one NC contact, a 12 to 48 V DC supply and a 2 m cable.
Technical specifications:
- Manufacturer: Telemecanique Sensors
- Reference: XSAV12373EX
- Range: Telemecanique inductive proximity sensors XS, XSA application series
- Application: rotation monitoring, ATEX dust
- Marking: II 2 D Ex tb IIIC T90°C Db IP67
- Dust zones: 21 and 22
- Certificates: INERIS 04ATEX0022, IECEx INE 17.0006
- Standards: IEC 60079-0, IEC 60079-31, ATEX directive 2014/34/EU
- Design: cylindrical M30 x 1.5, length 81 mm, threaded length 57 mm
- Mounting: flush mountable
- Enclosure: nickel plated brass, sensing face PPS
- Nominal sensing distance Sn: 10 mm
- Operating zone: 0 to 8 mm
- Adjustable frequency range: 120 to 3000 cycles/min
- Output: 3-wire, PNP, 1 NC
- Rated supply voltage: 12 to 48 V DC with reverse polarity protection
- Switching capacity: up to 200 mA, overload and short-circuit protected
- Run-up delay at power-up: 9 s
- Connection: 2 m PVC cable, 3 x 0.34 mm²
- Status LED: red
- Degree of protection: IP67
- Operating temperature: -20 to +60°C
- EAN: 3666916019467
When sold out, you can still preorder by requesting a quote below.
Important
The images shown are for illustration purposes only and may not be an exact
representation of the product.