Telemecanique XS618B1PBL2 Inductive Sensor M18 Sn 8mm PNP NC 12-48V DC 2m

The Telemecanique XS618B1PBL2 is an XS6 inductive proximity sensor in a flush mountable M18 nickel plated brass barrel, 62 mm long, with an 8 mm nominal sensing distance. It has a 3-wire PNP normally closed output for 12...48 V DC and a pre-wired 2 m PVC cable.

Technical specifications:

• Commercial reference: XS618B1PBL2
• Manufacturer: Telemecanique Sensors
• Range: Telemecanique Inductive proximity sensors XS
• Sensor name: XS6
• Device application: Mobile equipment
• Sensor design: Cylindrical M18, fixed body
• Flush mounting: Flush mountable
• Nominal sensing distance [Sn]: 8 mm
• Sensing range: > 4...8 mm
• Operating zone: 0...6.4 mm
• Differential travel: 1...15% of Sr
• Wiring technique: 3-wire, DC
• Discrete output: 1 NC, PNP
• Rated supply voltage [Us]: 12...48 V DC with reverse polarity protection
• Supply voltage limits: 10...58 V DC
• Switching capacity: <= 200 mA DC with overload and short-circuit protection
• Switching frequency: <= 1000 Hz
• Maximum voltage drop: <2 V (closed)
• Current consumption: <= 10 mA no-load
• Electrical connection: Cable, 2 m, 3 x 0.34 mm², PVC insulation
• Status LED: 1 yellow LED (output state)
• Thread: M18 x 1, threaded length 52 mm
• Length: 62 mm
• Front material: PPS
• Enclosure material: Nickel plated brass
• Degree of protection: IP68 double insulation per IEC 60529, IP69K per DIN 40050
• Operating temperature: -25...70 °C
• Storage temperature: -40...85 °C
• Vibration resistance: 25 gn, +/- 2 mm (10...55 Hz) per IEC 60068-2-6
• Shock resistance: 50 gn for 11 ms per IEC 60068-2-27

Features and benefits:

• Normally closed output, the signal opens when a metal target is detected
• Wide 12...48 V DC supply range
• IP68 and IP69K for wet and washdown areas
• Pre-wired 2 m cable
• Reverse polarity, overload and short-circuit protected output

Applications:

• Absence detection where an NC signal is required
• Position detection on mobile equipment and machinery
• Conveyor and material handling systems
• Replacement for an existing M18 PNP NC cable sensor

Marked CE. Certifications: UL, CSA, E2.

Also known as: Telemecanique XS618B1PBL2, XS6 M18 inductive sensor PNP NC, M18 proximity switch 8mm flush, XS6 PNP normally closed 2m cable sensor