Telemecanique XS112B3PCM12 Inductive Sensor M12 PNP NO+NC Sn 4mm

The Telemecanique XS112B3PCM12 is an XS1 inductive proximity sensor in a flush mountable M12 nickel plated brass barrel, with a 4 mm nominal sensing distance. It has a 4-wire PNP output providing one NO and one NC contact, runs on 12 to 24 V DC and terminates in a 4-pin M12 male connector.

Technical specifications:

• Commercial reference: XS112B3PCM12
• Manufacturer: Telemecanique
• EAN: 3389119623865
• Series / range: Telemecanique Inductive proximity sensors XS
• Series name: General purpose
• Sensor type: Inductive proximity sensor
• Sensor name: XS1
• Sensor design: Cylindrical M12
• Flush mounting: Flush mountable
• Nominal sensing distance [Sn]: 4 mm
• Type of output signal: Discrete
• Discrete output function: 1 NO + 1 NC
• Discrete output type: PNP
• Output circuit type: DC
• Wiring technique: 4-wire
• Electrical connection: Male connector M12, 4 pins
• Rated supply voltage [Us]: 12...24 V DC with reverse polarity protection
• Supply voltage limits: 9...36 V DC
• Switching capacity: <= 200 mA with overload and short-circuit protection
• Switching frequency: <= 2500 Hz
• Maximum voltage drop: <2 V (closed)
• Current consumption: 0...10 mA no-load
• Operating zone: 0...3.2 mm
• Differential travel: 1...15% of Sr
• Status LED: Output state: 1 LED (yellow)
• Thread type: M12 x 1
• Threaded length: 30 mm
• Detection face: Frontal
• Front material: PPS
• Enclosure material: Nickel plated brass
• Length: 50 mm
• Net weight: 0.02 kg
• IP degree of protection: IP69K conforming to DIN 40050; IP65 conforming to IEC 60529; IP67
• Safety level: SIL 2 conforming to IEC 61508; PL = d conforming to ISO 13849-1; SILCL 2 conforming to IEC 62061
• Ambient air temperature for operation: -25...70 °C
• Ambient air temperature for storage: -40...85 °C
• Marking: CE

Features and benefits:

• Both NO and NC outputs from one sensor, so no second device is needed
• Flush mountable, so the sensor can sit level with the surrounding metal
• Rated IP69K as well as IP67, suitable for high pressure washdown
• Rated SIL 2 and PL d, so it can be used in a safety function with a suitable controller
• M12 connector allows quick replacement without rewiring

Applications:

• Metal part presence detection on assembly and packaging machinery
• End of travel sensing on pneumatic and electric actuators
• Position feedback in washdown areas such as food and beverage plants

Also known as: Telemecanique XS112B3PCM12, XS112B3PCM12 OsiSense XS inductive sensor, XS1 M12 proximity sensor.