HL24P01 24-Module Pre-Wired 3-Phase Distribution Board 40A 30mA RCD IP30

The HL24P01 is a factory pre-wired and tested 24-module distribution board, supplied ready to connect. It pairs a Hager Volta two-row flush IP30 enclosure with Legrand RX³ protective devices: a 4-pole 40A 30mA Type A RCD feeding one three-pole and five single-pole B16 circuits. Built for three-phase 230/400V installations in homes, apartments and light commercial premises, it arrives with busbar, neutral and earth bars and internal wiring already done, leaving 12 spare ways for future circuits.

Technical specifications

• Part number: HL24P01
• Enclosure: Hager Volta VU24NC, flush (recessed) wall mounting
• Module capacity: 24 (two rows of 12 x 18mm)
• Protection rating: IP30
• Dimensions (approx.): 506 x 348 x 95 mm (H x W x D)
• Door: white hinged steel door with quarter-turn latch and technical-data label
• Main protection: Legrand RX³ 402075 RCCB, 4-pole, 40A, 30mA, Type A, 400V
• Outgoing protection: 1 x Legrand RX³ 419169 MCB, 3-pole, B16, 6kA, 400V; 5 x Legrand RX³ 419136 MCB, 1-pole, B16, 6kA, 230V
• Modules used: 12 of 24 (12 spare ways for future circuits)
• Internal wiring: 10 mm² H07V-K with insulated ferrules; Hager KDN363A 3-phase, 12-module busbar comb
• Distribution bars: separate neutral (blue) and protective earth (green/yellow) terminal bars
• Supply: three-phase, 230/400V AC, 50Hz

Features and benefits

• Factory pre-wired and tested: no internal assembly, busbar cutting or comb wiring on site
• Type A RCD trips on both AC and pulsating DC residual currents, covering circuits with electronic loads that a Type AC device would miss
• 30 mA sensitivity adds protection against electric shock
• B16 curve breakers suit general lighting and socket circuits with low inrush
• 12 spare module ways for adding circuits later
• Flush enclosure finishes level with the wall surface
• Branded protection throughout: Hager Volta enclosure, Legrand RX³ devices

Applications

• New three-phase consumer units in houses and apartments
• Renovation and rewiring projects
• Light commercial and office sub-distribution
• Replacement of older fuse boards

Built from components compliant with IEC 61008-1 (RCD) and IEC 60898-1 (MCBs); enclosure to DIN 43870, IP30 per IEC 60529.

Also known as: pre-wired 3-phase consumer unit 24 module, populated distribution board 40A 30mA, Hager Volta Legrand RX3 board, flush mount fuse board 3 phase, ready wired distribution board