WAGO Terminal Blocks & Connectors | Fast & Reliable Wiring

The WAGO 2002-1401 is a 4-conductor through terminal block in the TOPJOB S 2002 Series, rated 800 V / 24 A per IEC/EN 60947-7-1 and approved for Ex...

The WAGO 2002-1201 is a 2-conductor through terminal block from the TOPJOB S 2002 Series, designed for through-wiring in industrial and building in...

The WAGO 222-413 is a 3-conductor splicing connector with levers from the 222 Series, designed for all conductor types - solid, stranded, and fine-...

The WAGO 2273-500 is a mounting carrier for 2273 Series push wire connectors, supporting both single- and double-row connector arrangements on DIN-...

The WAGO 221-612 is a 2-conductor splicing connector with levers from the 221 Series, designed to join all copper conductor types - solid, stranded...

The WAGO 224-101 is a 1-pole lighting connector from the 224 Series (PUSH WIRE®), designed for quick and reliable termination between fixed install...

The WAGO 210-719 is a metal operating tool with a 2.5 x 0.4 mm blade and a partially insulated shaft, intended for actuating CAGE CLAMP® terminal b...

The WAGO 221-2401 is a 2-conductor inline splicing connector with levers from the 221 Series, designed to connect solid, stranded, and fine-strande...

The WAGO 210-648 is a short, angled metal operating tool with a partially insulated shaft, designed for actuating front-entry terminal blocks. The ...

The WAGO 2002-403 is a 3-way insulated push-in type jumper bar in the TOPJOB S family, rated at 800 V (III/3) and 25 A. It commons adjacent rail-mo...

The WAGO 2002-1207 is a 2-conductor ground terminal block from the TOPJOB® S 2002 Series, designed for DIN-35 rail mounting with a nominal cross-se...

The WAGO 221-942/000-006 is a 2-way insulated jumper for the 221 Series splicing connectors, designed to extend N and PE (ground) distribution betw...

The WAGO 221-942 is a 2-way insulated jumper for conductor entry in the 221 Series splicing connector family. It plugs into open clamping units wit...

The WAGO 2203-7641 is a multilevel installation terminal block from the 2203 Series, designed to streamline wire connections in DIN-rail mounted en...

The WAGO 2203-7646 is a multilevel installation terminal block from the 2203 Series, combining neutral, live, and protective earth connections in o...

The WAGO 793-5472 is a pre-printed WMB marker card supplied ready-marked with the standard electrical distribution symbols L1, L2, L3, N, and PE in...

The WAGO 2001-405 is a 5-way insulated push-in type jumper from the TOPJOB S series, used to common adjacent terminals in the 2001 Series rail-moun...

The WAGO 221-625 is a 5-conductor splicing connector with levers from WAGO's 221 Series, connecting solid, stranded, and fine-stranded copper condu...

The WAGO 221-2431 is a 2-conductor inline splicing connector with levers from the 221 Series, designed for tool-free in-line connections of solid, ...

The WAGO 207-1372 is a Size 1 inline gelbox from the 207 Series, designed to house WAGO 221 Series splicing connectors up to 4 mm² and deliver IPX8...

The WAGO 207-1432 is a Size 2 Gelbox Branch housing designed to protect 221 Series splicing connectors carrying cables up to 6 mm² in wet and damp ...

The WAGO 207-1333 is a branch-type Gelbox for cables, designed to enclose WAGO 221 Series and 2x73 Series splicing connectors up to 4 mm² in wet or...

The WAGO 2216-7792 is an end and intermediate plate, 1 mm thick, in orange, designed to terminate or divide groups of TOPJOB S rail-mount terminal ...

The WAGO 2216-7714 is a 1-conductor N-disconnect terminal block from the 2216 Series, built for quick and easy conductor connections on DIN-35 rail...