Schneider Electric Components | Circuit Breakers, Contactors, PLCs & More

The Schneider Electric LXD1B7 is a TeSys D series replacement contactor coil (LXD1 range) rated at 24 V AC 50/60 Hz, designed for use with LC1D09–D...

The Schneider Electric LXD1F7 is a replacement contactor coil from the TeSys D range (LXD1 series), rated at 110 V AC 50/60 Hz. It is designed as a...

The Schneider Electric M9F23220 is a 2-pole, 20 A, D-curve miniature circuit breaker (MCB) from the Multi9 C60SP range, designed for distribution a...

The Schneider Electric M9F42101 is a 1-pole, 1 A miniature circuit breaker (MCB) from the Multi9 C60BP range, designed for distribution application...

The Schneider Electric NSYCVF560M230PF is a ClimaSys CV forced-ventilation unit for electrical enclosures, rated IP54 and supplied at 230 V AC 50/6...

The Schneider Electric NSYDPA44 is an A4 polystyrene document pocket for door-mounting on PanelSeT and Thalassa enclosures, supplied as a set of on...

The TMC2SL1 is a serial link cartridge module for Schneider Electric Modicon M221 PLCs, providing both RS232 and RS485 serial communication ports v...

The Schneider Electric VCD01 is a 3-pole emergency stop disconnector switch from the TeSys Vario range, rated for door-panel mounting and the safe ...

The Schneider Electric VCD02 is a 3-pole TeSys Vario switch disconnector designed for emergency switching-off duty, door-mounted via a direct rotar...

The Schneider Electric VCD1 is a TeSys Vario 3-pole emergency stop disconnector rated at 32 A, designed for door-mounting in industrial control pan...

The Schneider Electric VCDN12 is a TeSys Mini-VARIO 3-pole emergency stop disconnector rated at 12 A, designed for door mounting via a 22.5 mm aper...

The Schneider Electric VW3A8306TF03 is a Modbus T tap connection accessory that splits a Modbus network line into two outputs. It features one RJ45...

The Schneider Electric VZ0 is an additional main pole for the TeSys VARIO range, supplying one additional 1 NO pole rated at 25 A. It is designed t...

The Schneider Electric VZ01 is a 1-pole additional main pole contact from the TeSys VARIO range, designed to add one normally open (NO) switching e...

The Schneider Electric VZ18 is a shaft extension accessory for TeSys VARIO disconnectors, designed to enable door-mounted operation of V3, V4, V5, ...

The Schneider Electric XALK01 is an empty control station from the Harmony XALK range, intended for user assembly with XB5 Ø 22 mm control and sign...

The XAPD3504 is a die cast empty control station in the Schneider Electric Harmony XAP (XB2 SL) range, designed to accept Ø 22 mm control and signa...

The Schneider Electric ZBZ32 is a plastic legend holder measuring 30 x 40 mm, designed to accept 8 x 27 mm unmarked legends. It is a marking access...

The Schneider Electric ZBZ58 is a yellow EPDM bellows seal and protective accessory for Harmony XB4 and Harmony XB5 emergency stop button heads, co...

The Schneider Electric EPH0100121 is a 1-way switch from the Asfora range, finished in white, supplied with a cover frame and featuring screwless t...

The Schneider Electric Asfora 1-way switch (EPH0100123) is a Cream-finish wall switch from the Asfora decorative wiring device range, supplied comp...

The Schneider Electric EPH0100162 is a 1-way switch from the Asfora range, finished in Steel and supplied without a cover frame. It features screwl...

The Schneider Electric Asfora EPH0100169 is a 1-way switch from the Asfora wiring device range, finished in Bronze and supplied without a cover fra...

The Schneider Electric EPH0100171 is a 1-way switch from the Asfora range, finished in Anthracite and supplied without a cover frame. It features s...