Schneider Electric METSEPM5560 PowerLogic PM5560 Power meter 2 ethernet 11MB 4DI/2DO 52 alarms

The Schneider Electric METSEPM5560 is a PowerLogic PM5560 flush panel-mount multifunction power meter designed for energy consumption monitoring, WAGES sub-metering (water, air, gas, electricity, steam), multi-tariff billing, and Ethernet-to-serial gateway applications.

• Accuracy: Class 0.2S active energy (IEC 62053-22); active power ±0.2 %, voltage ±0.1 %, current ±0.15 %, frequency ±0.05 %, power factor ±0.005, apparent power ±0.5 %, reactive energy ±1 %
• Power quality: harmonic analysis to the 63rd harmonic; sampling rate 128 samples per cycle
• Measurements: current, voltage, frequency, power factor, active and reactive power and energy; neutral current measured; earth current calculated
• Supply voltage: 90–528 V AC (45–65 Hz) or 100–300 V DC; maximum consumption 16 VA at 480 V
• CT inputs: 1 A or 5 A rated; current measurement range 50–10,000 mA; voltage range 20–400 V AC (L-N) / 20–828 V AC (L-L), 45–65 Hz
• Network type: 1P+N, 3P, 3P+N; 50 Hz and 60 Hz; 8 tariffs; 52 configurable alarms
• Communication: 2 × RJ45 Ethernet (Modbus TCP/IP daisy-chain at 10/100 Mbit/s, BACnet IP, DNP3 over Ethernet, SNTP client, SNMP Traps) plus RS485 Modbus RTU/ASCII and JBUS at 9.6, 19.2 and 38.4 kbaud; 2,500 V isolation on both ports
• Display: backlit LCD, 128 × 128 pixels
• Data logging: 1.1 MB onboard memory; event, alarm, maintenance and min/max logging with precise timestamping
• Web services: built-in web server, real-time data view, pre-defined diagnostic pages, email alarm notification
• I/O: 4 digital inputs (8-terminal screw block), 2 digital outputs (4-terminal screw block)
• Mounting: flush panel-mount with frame; width 96 mm, depth 72 mm
• Certifications: CE (IEC 61010-1), cULus (UL 61010-1), BTL; complies with IEC 62053-22:2020, IEC 61557-12:2015, IEC 62052-11:2020, IEC 62052-31:2015, ANSI C12.20, EN 50470-1 and EN 50470-3