WAGO 2202-1201 TOPJOB S Through Terminal Block 2.5mm² 24A Push-Button

The WAGO 2202-1201 is a 2-conductor through terminal block from the TOPJOB S 2202 Series, designed to connect electrical conductors quickly and safely in industrial and building applications. It uses Push-in CAGE CLAMP connection technology with push-button actuation and an integrated test port. The block accepts conductor cross-sections from 0.25 mm² to 4 mm², with a nominal cross-section of 2.5 mm² and a strip length of 10-12 mm.

Sold as a pack of 100 pieces.

Technical specifications:

• Catalog number: 2202-1201
• Manufacturer: WAGO
• Series: TOPJOB S, 2202
• Connection technology: Push-in CAGE CLAMP; push-button actuation
• Conductor range (solid and fine-stranded): 0.25-4 mm² / 22-12 AWG
• Push-in termination range (solid): 0.75-4 mm² / 18-12 AWG
• Strip length: 10-12 mm / 0.39-0.47 in
• Rated current: 24 A (IEC/EN 60947-7-1); 20 A (UL 1059, CSA 22.2 No 158)
• Nominal voltage: 800 V; rated impulse withstand voltage: 8 kV
• Rated voltage (UL/CSA): 600 V
• Ex rated voltage (ATEX/IECEx, Ex eb IIC Gb): 550 V; Ex rated current: 22 A
• Dimensions (W × H × D): 5.2 × 48.5 × 39.5 mm / 0.205 × 1.909 × 1.555 in
• Mounting: DIN-35 rail (35 × 15 and 35 × 7.5)
• Jumper slots: 2; marking: center and side; wiring direction: front-entry
• Color: gray; actuator color: orange
• Insulation material: Polyamide (PA66), flammability class UL94 V0; weight: 5.3 g
• Continuous operating temperature: -60 to +105 °C; processing temperature: -35 to +85 °C
• Certifications: IEC/EN 60947-7-1, UL 1059, CSA 22.2 No 158, ATEX PTB 18 ATEX 1005 U, IECEx PTB 18.0012U
• Railway tested: DIN EN 50155, DIN EN 61373, Category 1, Class A/B

Features and benefits:

• Push-in CAGE CLAMP technology allows tool-free direct insertion of solid and fine-stranded conductors with ferrules
• Integrated test port enables live circuit testing without disconnecting conductors
• Certified for Ex e II hazardous area applications under ATEX PTB 18 ATEX 1005 U and IECEx PTB 18.0012U (Ex eb IIC Gb)
• Tested per DIN EN 50155 and DIN EN 61373 for railway rolling stock service life and vibration requirements
• Center and side marking with 2 jumper slots support flexible circuit identification and bridging

Applications:

• Connecting conductors in industrial control panels and power distribution boards
• Building installation wiring where through-connection and potential distribution are required
• Terminal wiring in Ex e II increased-safety hazardous area zones
• Railway rolling stock electrical installations requiring DIN EN 50155 compliance

Also known as: WAGO 2202-1201, WAGO TOPJOB S push-button through terminal block, WAGO 2202 Series test port terminal block.