Phoenix Contact Components | Terminal Blocks & More

The Phoenix Contact STP 5-2 is a plug-in marker carrier that snaps into STTB 2,5, STTB 4, PTTB 2,5, and PTTB 4 double-level spring-cage terminal bl...

The Phoenix Contact ATS-RTK-BEN is a PVC partition plate that provides electrical isolation between adjacent terminal blocks in control panels and ...

The Phoenix Contact D-PTTBS 1,5/S is a gray end cover for terminating DIN rail-mounted terminal block assemblies. At 2.2 mm wide, 78.6 mm tall, and...

The Phoenix Contact PTTBS 1,5/S is a double-level terminal block from the PTS product family, combining two separate circuits in a single 3.5 mm wi...

The Phoenix Contact SKS 20 is a shield connection terminal block designed to apply cable shields directly to busbars. It uses spring-cage connectio...

The Phoenix Contact SKS 8 is a shield connection terminal block designed to apply cable shields to busbars in control panel and industrial wiring i...

The Phoenix Contact ST 16 BU is a feed-through terminal block rated at 1000 V nominal voltage and 76 A nominal current. Its spring-cage connection ...

The Phoenix Contact ST 16 (catalog number 3036149) is a feed-through terminal block rated for 1000 V nominal voltage and 76 A nominal current, desi...

The Phoenix Contact ST 2,5-3L is a 3-level spring-cage terminal block rated at 500 V and 20 A, combining two separate circuits in a single 5.2 mm w...

The SK 28 is a Phoenix Contact shield connection clamp designed to terminate cable shields directly onto busbars, achieving a contact resistance of...

The PSBJ-URTK 6 BK is a single-position test plug strip from Phoenix Contact, designed to replace the standard bridge screw and provide voltage pic...

The Phoenix Contact SB 2-8-T is a 2-position plug-in bridge bar with an 8.2 mm pitch, designed to electrically parallel adjacent terminal blocks in...

The Phoenix Contact SK 5 is a shield connection clamp designed to ground cable shields directly onto neutral busbars with a contact resistance of l...

The Phoenix Contact UKK 3 is a double-level terminal block that routes two independent circuits within a compact 5.2 mm wide body. Rated at 500 V a...

The Phoenix Contact PSM-STRIP-FC/PROFIB is a dedicated quick stripping tool for PROFIBUS Fast Connect bus cable, performing multi-stage stripping i...

The Phoenix Contact SF-CCK 9 is a universal metal control cabinet key engineered to fit all common enclosure closures in a single tool. It covers a...

The Phoenix Contact MICROFOX-S ESD (catalog number 1212480) is an ESD electronic diagonal cutter designed for precise wire and lead cutting in elec...

The Phoenix Contact WIREFOX-D CX-4 is a precision 2-stage stripping tool designed for coaxial cables with an external diameter of Ø 2.5 to 7.6 mm. ...

The Phoenix Contact SF-LTX SET is a 9-piece Torx offset screwdriver set covering sizes TX 8 through TX 40, designed for tightening and loosening To...

The UCT-WMCO 3,5 (23X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent identification of co...

The UCT-WMCO 3,5 (12X4) is a clip-on conductor marker sheet from Phoenix Contact, designed for the subsequent labeling of wires with an external di...

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The Phoenix Contact FBST 500-PLC GY is a continuous plug-in bridge that parallels adjacent terminal blocks across an entire row in a single operati...

The Phoenix Contact ST 2,5-TWIN is a three-conductor spring-cage feed-through terminal block rated at 800 V nominal voltage and 24 A nominal curren...