Phoenix Contact Components | Terminal Blocks & More

The Phoenix Contact WIREFOX-D CX-4 is a precision 2-stage stripping tool designed for coaxial cables with an external diameter of Ø 2.5 to 7.6 mm. ...

The Phoenix Contact SF-LTX SET is a 9-piece Torx offset screwdriver set covering sizes TX 8 through TX 40, designed for tightening and loosening To...

The UCT-WMCO 3,5 (23X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent identification of co...

The UCT-WMCO 3,5 (12X4) is a clip-on conductor marker sheet from Phoenix Contact, designed for the subsequent labeling of wires with an external di...

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The Phoenix Contact FBS 20-5 is a 20-position plug-in bridge for use in the CLIPLINE complete modular terminal block system, enabling up to 50 term...

The Phoenix Contact FBST 500-PLC GY is a continuous plug-in bridge that parallels adjacent terminal blocks across an entire row in a single operati...

The ZB 6,LGS:FORTL.ZAHLEN 21-30 from Phoenix Contact is a 10-section Zack marker strip pre-printed with consecutive numbers 21 to 30, designed for ...

The UCT-TM 10 is an unmarked terminal block marker from Phoenix Contact, supplied in white (RAL 9010) card sheets for terminals with tall marker gr...

The Phoenix Contact ST 2,5-TWIN-PE is a protective conductor terminal block with spring-cage connection, designed for safe and reliable grounding i...

The Phoenix Contact ST 2,5-TWIN is a three-conductor spring-cage feed-through terminal block rated at 800 V nominal voltage and 24 A nominal curren...

The Phoenix Contact ATP-UT-TWIN is a partition plate designed for use with twin-entry terminal blocks, providing physical separation and insulation...

The Phoenix Contact UT 6 BU is a 1000 V, 41 A blue feed-through terminal block using M4 screw connection for conductors from 0.2 mm² to 10 mm², wit...

The Phoenix Contact URTK 6 is a test disconnect terminal block developed specifically for use in current transformer secondary circuits, rated at 5...

The Phoenix Contact EB 2- 8 is a 2-position insertion bridge designed to electrically connect adjacent terminal blocks mounted on a common rail, wi...

The FBS 50-6 is a 50-position plug-in bridge from Phoenix Contact, designed to link up to 50 terminal blocks simultaneously in a single insertion s...

The REL-IR4/L-230AC/4X21 is a plug-in industrial single relay from Phoenix Contact, designed for a nominal input voltage of 230 V AC and featuring ...

The REL-IR4/LDP-110DC/4X21 is a plug-in industrial relay from Phoenix Contact with 4 changeover contacts and a 110 V DC coil, integrating a freewhe...

The REL-IR4/LDP- 24DC/4X21 is a Phoenix Contact plug-in industrial single relay with 4 changeover contacts for 24 V DC coil operation in industrial...

The REL-IR4/LDP- 12DC/4X21 is a Phoenix Contact plug-in industrial single relay with 4 changeover contacts, AgNi contact material, and additional h...

The Phoenix Contact RIF-RH-2 is a retaining bracket from the RIFLINE complete product family, designed to hold industrial relays securely on their ...

The RIF-2-BPT/4X21 is a relay base from Phoenix Contact's RIFLINE complete product family, designed to accept industrial relays with 2 or 4 changeo...

The Phoenix Contact UCT-WMCO 5,4 (23X8) is a clip-on wire marking sheet for conductor identification, compatible with cables from 4.7 mm to 5.4 mm ...

The UCT-WMCO 4,1 (12X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent conductor identifica...