Phoenix Contact Components | Terminal Blocks & More

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...

The Phoenix Contact E/NS 35 N is a gray polyamide end bracket designed to secure and terminate terminal block assemblies on NS 35/7.5 and NS 35/15 ...

The Phoenix Contact UT 16 is a 16 mm² feed-through terminal block rated at 1000 V nominal voltage and 76 A nominal current, using screw connection ...

The Phoenix Contact D-PT 16 N is a gray end cover designed to close off the open terminal side of PT series terminal blocks. Measuring 2.2 mm wide,...

The Phoenix Contact PT 6-PE is a protective conductor terminal block for grounding and earthing connections on NS 35/7.5 and NS 35/15 DIN rails. It...

The VAL-US-480D/30/3+0-FM is a Phoenix Contact three-channel surge protective device in the VALVETRAB US family, UL Listed Type 1 and IEC Type 2 cl...

The Phoenix Contact UCT-TMF 5 is a flat-slot terminal block marker sheet in white (RAL 9010), designed for 5.2 mm pitch terminal blocks and providi...

The Phoenix Contact AP 3 METER is a 1 m transparent PVC cover profile for protecting and covering terminal strips in DIN rail installations. It sna...

The Phoenix Contact PT 16 N-PE is a protective conductor terminal block from the PT product family, providing fast, reliable grounding via tool-fre...

The Phoenix Contact PT 4-PE is a protective conductor terminal block providing a low-resistance connection to ground potential via direct DIN rail ...

The Phoenix Contact FBS 10-5 BU is a 10-position plug-in bridge designed for the CLIPLINE complete system, enabling simultaneous bridging of up to ...

The FBS 2-6 is a 2-position plug-in bridge from Phoenix Contact, engineered to bridge adjacent terminal blocks within the CLIPLINE complete system ...

The Phoenix Contact FBS 10-6 is a 10-position plug-in bridge designed to parallel adjacent terminal blocks in the CLIPLINE complete system. With a ...

The Phoenix Contact FBS 2-12 is a 2-position plug-in bridge for use with the CLIPLINE complete terminal block system, bridging adjacent blocks via ...

The KLM-A is a Phoenix Contact terminal strip marker carrier designed for strip marking of terminal blocks, featuring an adjustable height and a 44...

The UCT-WMT (15X4) is a Phoenix Contact conductor marker in white (RAL 9010) sheet format, designed for clear wire identification across a cable di...

The Phoenix Contact PLC-RSC- 24DC/21 is a PLC-INTERFACE relay module combining a screw-connection basic terminal block with a plug-in miniature rel...

The Phoenix Contact UK 6 N is a feed-through terminal block rated for 800 V and 41 A, using screw connection with a 6 mm² nominal cross section for...

The HC-BB32-I-PT-M is a Phoenix Contact HC-BB series contact insert with a 32+PE connection profile in size B16, built for high-density power distr...

The HC-BB32-I-PT-F is a Phoenix Contact push-in contact insert from the HC-BB series, providing 32+PE power positions in a compact size B16 body. R...

The Phoenix Contact PTRVB 4-FI /RD is a 4-row push-in potential distributor for DIN rail mounting, distributing power from a single feed-in point a...

The Phoenix Contact PTRVB 4-FI /BU is a 4-row push-in potential distributor rated at 250 V and 37 A maximum total current, with 13 connections acro...

The PTI 2,5-L/TG is a Phoenix Contact installation level terminal block with tool-free push-in connection on two levels, rated 24 A / 400 V. Its 3-...

The Phoenix Contact D-UT 16 (catalog number 3047206) is an end cover designed to terminate and protect DIN rail terminal block assemblies. Manufact...