In Stock

The Eaton HNC-40/2/003 is a 2-pole Type AC RCCB from the Eaton Moeller xPole series, rated 40 A with a 30 mA residual fault current and 6 kA short-...

The Schneider Electric SDD114502 is a rotary LED dimmer from the Sedna Design and Elements range, finished in Anthracite. It supports both RC (capa...

The Schneider Electric EPH4300121 is a Cat. 5e UTP RJ45 communication socket outlet from the Asfora range, designed for flush-mounted installation ...

The Legrand 419221 is an RX³ miniature circuit breaker (MCB), 2-pole, rated 6 A on the C tripping curve, for 400 V installations. It has a short-ci...

The Legrand 412544 CX³ is a 2-pole DIN rail contactor rated 25A at 250V with 2 normally-open (2NO) contacts. It is designed for switching resistive...

The Siemens 3RH2911-2HA22 is a SIRIUS front-mounted auxiliary switch with 2 NO + 2 NC instantaneous contacts, designed to snap onto the front of 3R...

The WAGO 210-648 is a short, angled metal operating tool with a partially insulated shaft, designed for actuating front-entry terminal blocks. The ...

The Schneider Electric VCF3GE is a TeSys VARIO emergency stop switch disconnector in an enclosure, rated 50 A at 690 V AC. Designed for high-perfor...

The Schneider Electric LAD9ET1S is a red safety protective cover designed for TeSys Deca contactors, classified as an installation accessory. Compa...

The Schneider Electric C16N4 is a 4-pole ComPacT NSX160N base frame circuit breaker for electrical power distribution, rated 160A at 40°C. Supplied...

The Phoenix Contact FBS 2-12 is a 2-position plug-in bridge for use with the CLIPLINE complete terminal block system, bridging adjacent blocks via ...

The Eaton PL6-C4/1 is a single-pole miniature circuit breaker from the Eaton Moeller series xPole range, designed to protect circuits against overc...

The WAGO 221-500 is a mounting carrier for the 221 Series, designed to hold 2-, 3-, and 5-conductor 221 Series Splicing Connectors (4 mm²) on a DIN...

The Eaton M22-L-W is a flush-mount white indicator light from the Moeller RMQ-Titan M22 series, designed for 22.5 mm panel cutouts. It features a f...

The Eaton M22-PV is a mushroom-shaped, non-illuminated emergency stop/emergency switching off pushbutton from the RMQ-Titan Moeller series M22 rang...

The Eaton M22-D-B is a flat, momentary pushbutton from the RMQ-Titan M22 series with a blue, blank actuator and titanium bezel for Ø 22.5 mm panel ...

The Eaton M22-DL-B is a flush-mount, momentary illuminated pushbutton actuator from the RMQ-Titan M22 series, fitted with a blue blank flat lens an...

The Eaton M22-DDL-GR-GB1/GB0 is an RMQ-Titan series double actuator pushbutton with spring-return momentary action, green START and red STOP actuat...

The Eaton M22-LEDC230-W is a white LED element from the Moeller series M22 range, designed for base-fixing panel-mounted status signalling. It acce...

ABB PSR3-600-70 (article 1SFA896103R7000) is a compact softstarter for small three-phase motors, providing smooth acceleration and deceleration to ...

The Phoenix Contact D-UT 16 (catalog number 3047206) is an end cover designed to terminate and protect DIN rail terminal block assemblies. Manufact...

The Weidmuller 2007190000 WS 12/5 is a 12x5mm white terminal marker for labelling DIN rail terminal blocks. Write-on or print-on for circuit identi...

The Schelinger GKL-AC-C16 is a miniature circuit breaker (MCB) for DIN rail mounting. It provides overload and short-circuit protection in resident...

The Legrand 402032 is a residual current device, 2-pole, rated 25 A with 300 mA AC-type sensitivity for 230 V installations. It occupies 2 modules ...