In Stock

The Giovenzana MFI.3 is a snap-action microswitch with a roller lever actuator and NC+NO contacts. It is used as the internal switching element in ...

The Schneider Electric A9K02325 is a K60N miniature circuit breaker (MCB) from the Acti 9 range, providing overcurrent protection in low-voltage el...

The Runpotec 20666 is a cable pulling grip with swivel loop for cables of 40-50mm diameter. The braided steel mesh tightens automatically as the pu...

The Knipex 03 06 180 is a 180 mm chrome-plated combination pliers designed for gripping flat and round stock as well as cutting soft, medium-hard, ...

The Hager SFT125 is a 1-pole 25A modular changeover switch with top common point for DIN rail mounting. It provides I-0-II manual changeover betwee...

The Knipex 74 02 200 is a 200 mm high-leverage diagonal cutter designed for demanding cutting tasks in electrical, mechanical, and maintenance work...

The Phoenix Contact PT 6-PE is a protective conductor terminal block for grounding and earthing connections on NS 35/7.5 and NS 35/15 DIN rails. It...

The Schneider Electric 18658 is a 4-pole miniature circuit breaker from the Acti 9 NG125N range, rated at 80 A at 40°C with a C tripping curve. Des...

The Eaton NHI-E-11-PKZ0 (catalog 082882) is a front-mounted standard auxiliary contact for Eaton Moeller series PKZ0 motor protective circuit-break...

The Knipex 78 03 140 Electronic Super Knips XL is a 140 mm precision flush cutter designed for fine cutting work in electronics and precision mecha...

ABB XLP00-6BC (article 1SEP101890R0002) is a 3-pole fuse switch disconnector rated at 160 A, combining overcurrent fuse protection and circuit isol...

The Socomec 26003026 is a 3-pole, 250 A AC load break switch from the SIRCO range, designed for manually or remotely operated multipolar switching ...

The Schneider Electric A9A26919 is an iSD+OF signal contact from the Acti9 range, providing two changeover outputs for remote indication of device ...

The Legrand 412412 CX³ is a 2P impulse relay (bistable relay) rated 16A at 250V with 2NO contacts. Each control pulse toggles the relay ON or OFF, ...

The WAGO 2216-7692 is an end and intermediate plate designed for use with TOPJOB S 2216 Series installation rail-mount terminal blocks. At 1 mm thi...

The WAGO 2203-7692 is an end and intermediate plate, 0.8 mm thick, in orange, for use with rail-mount terminal block assemblies. It installs via sn...

The WAGO 2002-402/000-006 is a 2-way insulated push-in type jumper bar in blue for the 2002 Series, used to common adjacent terminal blocks in a si...

The Schneider Electric XACA671 is a 6-pushbutton pendant control station from the Harmony XAC range, purpose-built for single-speed crane and hoist...

The Schneider Electric A9A26927 is an auxiliary contact for the Acti9 iSD (switch-disconnector) range, used to report contact position on AC or DC ...

The Siemens 3RT2046-1AP00 is a SIRIUS 3RT2 three-pole power contactor rated at 95 A and 45 kW at 400 V for AC-3e/AC-3 motor switching duty. Its 230...

The Siemens 3RT1055-6AB36 is a high-performance SIRIUS 3RT1 power contactor engineered for dependable switching and control of three-phase motors a...

The Siemens 3RH2911-2HA22 is a SIRIUS front-mounted auxiliary switch with 2 NO + 2 NC instantaneous contacts, designed to snap onto the front of 3R...

The ABB SH201-B10 (article 2CDS211001R0105) is a single-pole miniature circuit breaker from the SH200 Compact Home series, rated at 10 A with a B t...

The LC1K0601P7 is a 3-pole AC contactor from Schneider Electric's TeSys K range, designed for AC-3 motor switching and general load control duties....