In Stock

The Schneider Electric Asfora EPH2900169 is a single socket outlet in Bronze, part of the Asfora wiring device range. It is supplied without a cove...

The Schneider Electric Asfora EPH2900162 is a single socket outlet from the Asfora wiring device range, finished in Steel. It is supplied without a...

The Giovenzana 040 is a black rotary knob actuator with a 40 mm diameter for SQ6-spindle switch-disconnectors. It mounts directly onto the switch s...

The Schneider Electric LC2D12P7 is a TeSys D reversing contactor for controlling the direction of three-phase AC motors and resistive loads in indu...

The Schneider Electric GV3P65 is a 3-pole motor circuit breaker in the TeSys GV3 range, providing thermomagnetic motor protection with a current se...

The FBS 50-6 is a 50-position plug-in bridge from Phoenix Contact, designed to link up to 50 terminal blocks simultaneously in a single insertion s...

The Lapp 4510042 is an H05V-K single-core flexible cable with 0.75mm² cross-section in red PVC insulation, supplied as a 100m coil. Rated 300/500V ...

The Telemecanique XCKN2108G11 is a compact limit switch from the XC Standard series, used for position detection and end-of-travel control in indus...

The Giovenzana PLML3L220 PLML is a Yellow LED pilot light rated 220V AC/DC for 22mm panel cutout installation. The universal AC/DC input eliminates...

The Eaton PF6-40/2/003-A is a 2-pole residual current circuit breaker (RCCB) from the Eaton Moeller xPole series, designed for residential and comm...

The ABB M1363 (article 2CSM259343R0721) is a modular socket outlet built for installation inside civil and industrial electrical switchboards. It s...

The Siemens 3RH2911-1FA40 is a SIRIUS front-mounting auxiliary switch with 4 normally open (NO) instantaneous contacts and screw terminals. It snap...

The Schneider Electric A9R21463 is an Acti 9 iID 4-pole residual current circuit breaker (RCCB), providing earth leakage protection without overcur...

The Hager ESC263 is a Hager ESC modular contactor, 2P, 63 A, 230V AC coil. For switching lighting, heating, and motor loads in distribution boards....

The Eaton DILM150-XHI22 is a four-pole front-mounting auxiliary contact module for use with DILM40 to DILM170 contactors. It provides 2 normally op...

The Eaton DILEM-01(230V50HZ,240V60HZ) is a three-pole mini contactor from the Moeller series, designed for AC operation with a 230 V 50 Hz / 240 V ...

The LV432598T is an extended rotary handle from Schneider Electric for the ComPacT NSX400/630 range of moulded-case circuit breakers. The black han...

The Schneider Electric LC1D258P7 is a 4-pole contactor from the TeSys D range, designed for switching resistive and slightly inductive loads in AC-...

The Schneider Electric GVAE20 is a front-mount auxiliary contact block for the TeSys GV2 and GV3 motor circuit breaker families, providing 2 normal...

The Giovenzana PPDNR.3 is a dual push button unit with up and down directional symbols for crane/hoist operation, providing two separate momentary ...

The Eaton M22-I6 is a surface mounting enclosure in the Moeller M22 series, offering 6 mounting locations for 22.5 mm control devices. Its RAL 7035...

The Legrand 411061 DX³ is a residual current circuit breaker with overcurrent protection (RCBO) from the DX³ range, combining MCB overload/short-ci...

The Socomec 26003026 is a 3-pole, 250 A AC load break switch from the SIRCO range, designed for manually or remotely operated multipolar switching ...

The Schneider Electric A9A26919 is an iSD+OF signal contact from the Acti9 range, providing two changeover outputs for remote indication of device ...