WAGO 2206-1207 TOPJOB S 2-Conductor Ground Terminal Block 6 mm² GN-YE

The WAGO 2206-1207 is a 2-conductor ground terminal block from the TOPJOB S 2206 Series, designed to directly connect electrical conductors to the mounting rail via an integrated mounting foot - providing both electrical and mechanical stability. It accepts copper conductors from 0.5 to 10 mm² and uses Push-in CAGE CLAMP technology for tool-free insertion of solid, stranded, and fine-stranded conductors with ferrules, without screw connections.

Technical specifications:

• Catalog number: 2206-1207
• Manufacturer: WAGO
• Series: TOPJOB S, 2206 Series
• Type: 2-conductor ground terminal block with push-button and test port
• Connection technology: Push-in CAGE CLAMP
• Actuation type: Push-button
• Nominal cross-section: 6 mm²
• Solid conductor: 0.5-10 mm² / 20-8 AWG; push-in: 1-10 mm² / 14-8 AWG
• Fine-stranded conductor: 0.5-10 mm² / 20-8 AWG
• Fine-stranded with insulated ferrule: 0.5-6 mm² / 20-10 AWG
• Fine-stranded with ferrule, push-in: 2.5-6 mm² / 16-10 AWG
• Strip length: 13-15 mm / 0.51-0.59 in
• Wiring direction: Front-entry
• Connectable conductor material: Copper
• Width: 7.5 mm / Height: 57.3 mm / Depth from DIN-rail upper edge: 32.9 mm
• Mounting: DIN-35 rail (35 × 15 mm and 35 × 7.5 mm)
• Clamping units: 2 / Jumper slots: 2
• Marking: Center and side
• Color: Green-yellow / Actuator color: Orange
• Insulation material: Polyamide (PA66), UL94 V0
• Weight: 18.3 g
• Continuous operating temperature: -60 to +105 °C
• Standards: IEC/EN 60947-7-2; DIN EN 50155 (VDE 0115-200):2022-06; DIN EN 61373 (VDE 0115-0106):2011-04
• Ex rating: Suitable for Ex e II applications

Features and benefits:

• Push-in CAGE CLAMP technology enables tool-free insertion of solid, fine-stranded, and ferrule-tipped conductors directly into the clamping point - faster than screw connections
• Integrated mounting foot connects the DIN rail directly to the conductor, ensuring both electrical and mechanical ground continuity without a separate adapter
• Push-button actuation allows conductor release without additional tools
• Suitable for specific Ex e II hazardous area applications - refer to the product datasheet and technical section for detailed Ex ratings
• Tested per DIN EN 50155 and DIN EN 61373 for vibration, shock, and service life in railway rolling stock environments

Applications:

• PE (protective earth) connections in industrial control panels and distribution boards
• Electrical installations in Ex e II (increased safety) classified hazardous zones
• Railway rolling stock wiring where DIN EN 50155 compliance is required
• Building installation wiring where conductors must be grounded directly to the DIN rail

Also known as: WAGO 2206-1207, WAGO TOPJOB S 6 mm² ground terminal block, WAGO 2206 Series push-in PE terminal block.