Contactors

ABB CA5-22E (article 1SBN010040R1022) is a 4-pole front-mounted auxiliary contact block fitted with screw terminals. It carries 2 normally open (N....

The Schneider Electric CR1F500M7 is a 3-pole magnetic latching contactor from the TeSys F range, rated 500 A (AC-3, <=440 V). The 220-230 V AC o...

The Schneider Electric LA4KC1B is a suppressor module from the TeSys K range, designed for bidirectional peak voltage limiting. It provides effecti...

The Schneider Electric LADR0 is an off-delay time delay auxiliary contact block from the TeSys Deca range. It provides a 1 NO + 1 NC contact arrang...

The Schneider Electric LADN10 is a TeSys D auxiliary contact block with 1 normally open (NO) contact and screw terminal connections. Designed for f...

The ABB CAL5-11 (article 1SBN010020R1011) is a 2-pole side-mounted auxiliary contact block that clips onto ABB A-series contactors and N contactor ...

The Schelinger SC-201-2P-25-40 is a DIN rail-mounted circuit protection device. A62-SC-201-2P-25-40 Schelinger Modular ContACtor Sc201 2P 25A Typ40...

The Circutor CMC 75 B (code R281A9) is a capacitor-switching contactor from the CMC-B series, purpose-built for energising and de-energising single...

The Schneider Electric LADN01 is a TeSys D auxiliary contact block with a single normally closed (NC) contact and instantaneous operation. It mount...

The Schneider Electric LAD6K10M is a mechanical latch block from the TeSys range, designed to hold TeSys series contactors in the latched position....

ABB CAL4-11 (article 1SBN010120R1011) is a 2-pole side-mounted auxiliary contact block that clips directly onto ABB AF and NF series contactors and...

The Schneider Electric A9C20731 is an Acti 9 iCT single-pole contactor rated at 25 A (AC-7A) with a 230-240 V AC 50 Hz coil for remote switching of...

The Schneider Electric LA4DT0U is an electronic timer module from the TeSys range, designed for use with TeSys D and TeSys F series contactors. It ...

The Circutor CMC 12 B (code R281A6) is a capacitor-switching contactor from the CMC-B series, designed to switch single-step and multi-step capacit...

The ABB BEA38-4 (article 1SBN082306T2000) is an insulated connecting link that bridges ABB contactors in the AF26-AF38, AFC26-AFC38, and AFS26-AFS3...

The Schneider Electric CR1F265M7 is a 3-pole magnetic latching contactor from the TeSys F range, rated 265 A (AC-3) at up to 440 V AC. Its 220-230 ...

The ABB VM4 (article 1SBN030105T1000) is a mechanical interlock unit that fits between two contactors to enforce mutual exclusion - when one contac...

The Schneider Electric LA4DFB is a TeSys D interface amplifier module with relay output, enabling DC logic systems to control AC-coil TeSys D conta...

The Schneider Electric VZ17 is a shaft extension accessory for the TeSys VARIO range, designed to extend the operating handle of V02 to V2 series d...

The Schneider Electric VZ16 is an additional earthing contact block from the TeSys Vario range, designed for use with V5 and V6 disconnectors. It p...

The Schneider Electric VCCD2 is a TeSys Vario emergency stop switch disconnector rated at 40 A, designed for door-mounting handle with DIN rail or ...

The Schneider Electric VBF01 is a TeSys Vario switch disconnector rated at 20 A, designed for door mounting in industrial control panels. It provid...

The Schneider Electric V1 is a TeSys VARIO 3-pole switch disconnector body with a 32 A conventional free air thermal current and rated operational ...

The Schneider Electric LUCD32BL is an advanced control unit for the TeSys Ultra range, designed for motor management and protection applications. I...