Automation Control Components

The Phoenix Contact ST 16-PE is a spring-cage protective conductor terminal block with a nominal cross section of 16 mm², engineered for fast, reli...

The Phoenix Contact ST 4-PE is a spring-cage protective conductor terminal block for reliable PE terminations in industrial switchgear and control ...

The ATP-ST QUATTRO is a Phoenix Contact partition plate designed to provide physical and electrical separation between adjacent terminal blocks in ...

The Phoenix Contact FBS 5-6 is a 5-position plug-in bridge for paralleling adjacent modular terminal blocks in a single snap-in operation. With a 6...

The Phoenix Contact FBS 4-6 is a 4-position plug-in bridge with a 6.2 mm pitch, designed for bridging terminal blocks in the CLIPLINE complete syst...

The Phoenix Contact FBS 20-5 is a 20-position plug-in bridge for use in the CLIPLINE complete modular terminal block system, enabling up to 50 term...

The Phoenix Contact SK 35 is a steel shield connection terminal block that attaches cable shields onto neutral busbars with a contact resistance be...

The Phoenix Contact FBS 5-10 is a 5-position plug-in bridge for paralleling modular terminal blocks at a 10.2 mm pitch. With a maximum load current...

The Phoenix Contact FBS 6-6 is a 6-position plug-in bridge designed for rapid potential connection across multiple terminal blocks in the CLIPLINE ...

The UCT-TM 10 is an unmarked terminal block marker from Phoenix Contact, supplied in white (RAL 9010) card sheets for terminals with tall marker gr...

The ABB 2515-94-507 (article 2CKA001725A1483) is a 5-gang cover frame in alpine white, belonging to the Basic55 installation range. It accommodates...

The ABB SD202/16 (article 2CDD282101R0016) is a 2-pole switch disconnector rated at 16 A. It is designed to manually switch and isolate single-phas...

The ABB SD201/16 (article 2CDD281101R0016) is a single-pole switch disconnector rated at 16 A. It provides a defined isolation point between supply...

ABB PSE210-600-70-1 (article 1SFA897112R7001) is a softstarter for small to medium-sized three-phase motors, rated at 210 A with an operating volta...

The ABB BEA16-4 (article 1SBN081306T1000) is an insulated connecting link that joins ABB contactors to manual motor starters in a single, combined ...

ABB AF30-30-00-13 (article 1SBL277001R1300) is a 3-pole contactor with screw terminals, rated at 690 V IEC or 600 V UL, built to control motors up ...

ABB AF09-30-10-13 (article 1SBL137001R1310) is a 3-pole industrial contactor for motor control and power switching applications. It drives motors u...

The ABB AF09Z-30-10-21 (article 1SBL136001R2110) is a 3-pole contactor rated at 690 V IEC / 600 V UL, designed for motor control up to 4 kW / 400 V...

ABB ESB20-20N-06 (article 1SBE121111M0620) is a 20 A installation contactor built to switch single loads in residential and industrial installation...

ABB TF42-16 (article 1SAZ721201R1047) is a thermal overload relay covering a current range of 13 - 16 A. Designed as an electromechanical protectio...

The ABB TF42-10 (article 1SAZ721201R1043) is a thermal overload relay providing electromechanical protection for motor main circuits. It defends mo...

ABB TF42-4.2 (article 1SAZ721201R1035) is a thermal overload relay with a current setting range of 3.1 A to 4.2 A, built to protect motors in the m...

The ABB MS165-80 (article 1SAM451000R1019) is a manual motor starter providing overload and phase failure protection for motors up to 45 kW at 400 ...

The ABB MS132-6.3 (article 1SAM350000R1009) is a compact manual motor starter with a current setting range of 4.0 A to 6.3 A and a device width of ...