Automation Control Components

The Siemens 3RH1921-1CA10 is a SIRIUS front-side auxiliary switch with 1 NO instantaneous contact and screw terminals, designed to snap onto the fr...

The Phoenix Contact D-PTI/3B is an end cover that closes and protects the end of terminal block rows, providing a neat finish to DIN rail assemblie...

The Phoenix Contact FBS 3-3,5 is a 3-position plug-in bridge for use with the CLIPLINE complete terminal block system, enabling multiple terminal b...

The Phoenix Contact D-PT 10 is a gray end cover designed to close off and protect the ends of terminal block assemblies mounted on DIN rails. At ju...

The D-PT 4-PE/3L is a Phoenix Contact end cover for DIN rail terminal block assemblies, closing and insulating the end of a terminal strip. At 2.2 ...

The Phoenix Contact PT 4-PE/3L is a four-level motor terminal block using push-in connection, rated 26 A at 800 V with conductor cross-sections fro...

The D-PT 1,5/S-QUATTRO is a Phoenix Contact end cover that closes and protects the ends of DIN rail terminal block rows. Measuring 2.2 mm wide, 63....

The Phoenix Contact UT 35 IB BU is a feed-through terminal block rated at 1000 V nominal voltage and 125 A nominal current, built for high-current ...

The Phoenix Contact D-UT 16 (catalog number 3047206) is an end cover designed to terminate and protect DIN rail terminal block assemblies. Manufact...

The Phoenix Contact UT 4-HESILED 24 (5X20) is a fuse modular terminal block from the UT product family, designed for 5 x 20 mm glass or ceramic fus...

The Phoenix Contact UT 2,5 RD (catalog number 3045062) is a feed-through terminal block rated at 1000 V and 24 A with M3 screw connection. Acceptin...

The Phoenix Contact UT 35-PE is a protective conductor terminal block for DIN rail mounting, accepting conductors from 1.5 mm² to 35 mm² via M6 scr...

The Phoenix Contact ST 4-MT is a knife-disconnect terminal block rated at 400 V nominal voltage and 20 A nominal current, using spring-cage connect...

The Phoenix Contact D-ST 2,5-3L is an end cover designed to close and insulate the open ends of D-ST series terminal block assemblies on DIN rails....

The Phoenix Contact D-STTB 2,5 (catalog number 3030459) is a gray end cover designed to terminate and protect DIN rail-mounted terminal block assem...

The FBS 2-6 is a 2-position plug-in bridge from Phoenix Contact, engineered to bridge adjacent terminal blocks within the CLIPLINE complete system ...

The Phoenix Contact FBS 2-12 is a 2-position plug-in bridge for use with the CLIPLINE complete terminal block system, bridging adjacent blocks via ...

The Phoenix Contact FBS 5-10 is a 5-position plug-in bridge for paralleling modular terminal blocks at a 10.2 mm pitch. With a maximum load current...

The Phoenix Contact FBST 500-PLC RD is a continuous plug-in bridge rated for a maximum load current of 32 A, designed to parallel multiple terminal...

The Phoenix Contact SZS 0,4X2,0 is a precision micro screwdriver with a bladed tip measuring 0.4 mm thick by 2.0 mm wide and a 60 mm blade length, ...

The ABB B7-30-10-80 (article GJL1311001R8100) is a compact 3-pole mini contactor with one auxiliary contact and screw terminals. Rated for a 220-24...

The ABB 2515-94-507 (article 2CKA001725A1483) is a 5-gang cover frame in alpine white, belonging to the Basic55 installation range. It accommodates...

The ABB SD204/50 (article 2CDD284101R0050) is a 4-pole switch disconnector rated at 50 A, designed to switch and isolate circuits in a single opera...

The ABB SD202/16 (article 2CDD282101R0016) is a 2-pole switch disconnector rated at 16 A. It is designed to manually switch and isolate single-phas...