Wago 2003-7646 CAGE CLAM Multilevel Installation terminal Block with operating slots 2.5 mm, gray

The WAGO 2003-7646 is a three-level, three-potential multilevel installation terminal block from the 2003 Series, designed for N/L/PE connections in electrical installation applications. Its Push-in CAGE CLAMP® connection system accepts solid and fine-stranded copper conductors across a wide cross-section range, allowing direct tool-free insertion of solid conductors and ferrule-terminated conductors where applicable.

• Connection technology: Push-in CAGE CLAMP®; actuation via operating tool
• Levels and potentials: 3 levels, 3 potentials (N/L/PE); 5 clamping units total
• Nominal conductor cross-section: 2.5 mm²
• Connectable cross-sections (copper only): solid 0.25–4 mm² / 22–12 AWG; fine-stranded 0.25–4 mm² / 22–12 AWG; fine-stranded with insulated ferrule 0.25–2.5 mm² / 22–14 AWG; push-in termination (solid) 0.75–4 mm² / 18–12 AWG; push-in termination (fine-stranded with ferrule) 1–2.5 mm² / 18–14 AWG
• Strip length: 10–12 mm (0.39–0.47 in)
• Rated current: 24 A; maximum current at conductor cross-section: 32 A
• Nominal voltage (potential to earth): 250 V, overvoltage category III, pollution degree 3 per IEC/EN 60947-7-1
• Rated impulse withstand voltage (potential to earth): 4 kV
• Nominal voltage (potential to potential): 400 V, overvoltage category III, pollution degree 3 per IEC/EN 60947-7-1
• Rated impulse withstand voltage (potential to potential): 6 kV
• Power loss per pole: 0.7661 W at 24 A; resistance: 0.00133 Ω
• Wiring direction: Front-entry
• Dimensions: 5.2 mm W × 96 mm H × 42.3 mm depth from DIN-35 rail upper edge
• Colour: Grey