Skip to content
Can't find what you're looking for? Reach out to us!
Can't find what you're looking for? Reach out to us!

Telergon C2-01253NTDDT automatic transfer switch 3P+N 125A

Free Shipping

Get free shipping on orders exceeding €300!

Original price $1,362.05 - Original price $1,362.05
Original price
$1,362.05
$1,362.05 - $1,362.05
Current price $1,362.05

The Telergon C2-01253NTDDT is a 125 A 3P+N automatic transfer switch from the C2 Series, providing automatic and programmable transfer between two supplies such as a mains feed and a standby generator. It is a size 0 unit classified PC class AC-33B to IEC 60947-6-1.

Technical specifications:

  • Commercial reference: C2-01253NTDDT
  • Manufacturer: Telergon
  • Series / range: C2 Series automatic transfer switch
  • Product type: Automatic transfer switch (ATS), automatic and programmable transfer
  • Number of poles: 3P+N
  • Frame size: 0
  • Rated thermal current [Ith]: 125 A
  • Rated operational current [Ie] at 415 V (AC-31B, AC-32B, AC-33B): 125 A
  • Rated insulation voltage [Ui]: 690 V
  • Rated impulse withstand voltage [Uimp]: 8 kV
  • Rated short-circuit making capacity [Icm]: 20 kA peak
  • Rated short-time withstand current [Icw] 0.2 s: 10 kA
  • Rated conditional short-circuit current [Icc]: 120 kA
  • Rated control voltage: 230 V / 50 Hz
  • Operating transfer time: 1.25 s
  • Contact transfer time: 0.6 s
  • ATSE class: PC class AC-33B
  • Operation cycles: 6,000
  • Terminal tightening torque: M6, 3 Nm
  • Connection capacity, Cu cable: 50 mm²
  • Connection capacity, Cu bar: 4x20 mm
  • Standards: IEC 60947-6-1

Features and benefits:

  • Automatic transfer and automatic recovery between sources I and II
  • LCD display included for status and programming
  • RS-485 port with bidirectional transmission for remote communication
  • Engine exerciser for scheduled generator test runs
  • Three-phase monitoring with voltage and frequency protection
  • Generator start / stop control and fire-linkage (passive) input
  • Source priority setting and DC 24 V auxiliary power input

Applications:

  • Mains / generator changeover in commercial and industrial buildings
  • Standby supply for data centres, hospitals and other critical loads
  • Dual-feed distribution boards requiring automatic source selection
  • Generator sets needing automatic start and load transfer

Compliant with IEC 60947-6-1. Part of the Telergon C2 Series.

Also known as: Telergon C2-01253NTDDT, C2 ATS 3P+N 125 A.

When sold out, you can still preorder by requesting a quote below.

Click here to request a quote

Important

The images shown are for illustration purposes only and may not be an exact
representation of the product.