{"product_id":"siemens-6es7134-6hb00-0ca1-et-200sp-analog-input-ai-2xu-i-hf-16-bit","title":"Siemens 6ES7134-6HB00-0CA1 ET 200SP Analog Input AI 2xU\/I HF 16-bit","description":"\u003cp\u003eThe Siemens 6ES7134-6HB00-0CA1 is a SIMATIC ET 200SP analog input module with 2 differential channels for voltage or current measurement in 2-wire or 4-wire connection. It is a High Feature module with 16-bit resolution, channel-by-channel diagnostics and isochronous mode, and plugs onto a BU type A0 or A1 BaseUnit.\u003c\/p\u003e\n\u003cp\u003eTechnical specifications:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMLFB: 6ES7134-6HB00-0CA1\u003c\/li\u003e\n  \u003cli\u003eManufacturer: Siemens\u003c\/li\u003e\n  \u003cli\u003eProduct line: SIMATIC ET 200SP\u003c\/li\u003e\n  \u003cli\u003eProduct type designation: AI 2xU\/I 2-\/4-wire HF\u003c\/li\u003e\n  \u003cli\u003eNumber of analog inputs: 2, differential inputs\u003c\/li\u003e\n  \u003cli\u003eResolution: 16 bit including sign\u003c\/li\u003e\n  \u003cli\u003eVoltage input ranges: 0 to +10 V, 1 to 5 V, -10 to +10 V, -5 to +5 V\u003c\/li\u003e\n  \u003cli\u003eCurrent input ranges: 0 to 20 mA, 4 to 20 mA, -20 to +20 mA\u003c\/li\u003e\n  \u003cli\u003eInput resistance: 75 kOhm (voltage), 130 Ohm (current)\u003c\/li\u003e\n  \u003cli\u003eMeasurement principle: Sigma Delta\u003c\/li\u003e\n  \u003cli\u003eBasic error limit at 25 C: 0.05 % of input range\u003c\/li\u003e\n  \u003cli\u003eOperational error limit over temperature range: 0.1 % of input range\u003c\/li\u003e\n  \u003cli\u003eSupply voltage: 24 V DC (19.2 to 28.8 V), reverse polarity protected\u003c\/li\u003e\n  \u003cli\u003eCurrent consumption: 39 mA without sensor supply\u003c\/li\u003e\n  \u003cli\u003ePower loss: 0.95 W without sensor supply\u003c\/li\u003e\n  \u003cli\u003eEncoder supply: 24 V, short-circuit protected, max. 20 mA per channel (2-wire)\u003c\/li\u003e\n  \u003cli\u003eIsochronous mode: Yes, 250 us\u003c\/li\u003e\n  \u003cli\u003eDiagnostics: Wire break (4-20 mA), short-circuit, overflow\/underflow, supply voltage monitoring, limit value alarm\u003c\/li\u003e\n  \u003cli\u003eIsolation: Between channels, and between channels and backplane bus; tested with 707 V DC\u003c\/li\u003e\n  \u003cli\u003eUsable BaseUnits: BU type A0, A1\u003c\/li\u003e\n  \u003cli\u003eColour code: CC03\u003c\/li\u003e\n  \u003cli\u003eMechanical coding element: Type A\u003c\/li\u003e\n  \u003cli\u003eEngineering: STEP 7 TIA Portal from V13, STEP 7 from V5.5, PCS 7 from V8.1 SP1\u003c\/li\u003e\n  \u003cli\u003eMax. shielded cable length: 1 000 m (200 m for voltage measurement)\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: -30 C to 60 C (horizontal installation)\u003c\/li\u003e\n  \u003cli\u003eDimensions (WxHxD): 15 x 73 x 58 mm\u003c\/li\u003e\n  \u003cli\u003eWeight: 32 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures and benefits:\u003c\/p\u003e\u003cul\u003e\n  \u003cli\u003eHigh Feature module: 16-bit resolution and 0.05 % basic error limit at 25 C\u003c\/li\u003e\n  \u003cli\u003eChannel-by-channel diagnostics with wire-break and short-circuit detection\u003c\/li\u003e\n  \u003cli\u003eIsochronous mode down to 250 us for deterministic acquisition\u003c\/li\u003e\n  \u003cli\u003eParameterisable integration time and interference-frequency suppression (16.6 \/ 50 \/ 60 Hz and higher)\u003c\/li\u003e\n  \u003cli\u003eReparameterisation and calibration possible in RUN\u003c\/li\u003e\n  \u003cli\u003eFirmware update supported; I\u0026amp;M0 to I\u0026amp;M3 data\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplications:\u003c\/p\u003e\u003cul\u003e\n  \u003cli\u003eAnalog signal acquisition in distributed ET 200SP I\/O stations\u003c\/li\u003e\n  \u003cli\u003eReading 4-20 mA transmitters with wire-break monitoring\u003c\/li\u003e\n  \u003cli\u003eHigh-accuracy voltage measurement in process and machine control\u003c\/li\u003e\n  \u003cli\u003ePROFINET or PROFIBUS distributed I\/O built with SIMATIC S7 controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSIMATIC ET 200SP module, HW functional status from FS06. Requires a BU type A0 or A1 BaseUnit (ordered separately).\u003c\/p\u003e\n\u003cp\u003eAlso known as: Siemens 6ES7134-6HB00-0CA1, ET 200SP AI 2xU\/I 2-\/4-wire High Feature.\u003c\/p\u003e","brand":"SIEMENS","offers":[{"title":"Default Title","offer_id":58552525193480,"sku":"SMN6ES7134-6HB00-0CA1","price":337.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/4351\/3096\/files\/SMN6ES7134-6HB00-0CA1.jpg?v=1787773908","url":"https:\/\/gabbyelectric.com\/en-ca\/products\/siemens-6es7134-6hb00-0ca1-et-200sp-analog-input-ai-2xu-i-hf-16-bit","provider":"Gabby Electric","version":"1.0","type":"link"}