WAGO Terminal Blocks & Connectors | Fast & Reliable Wiring

The WAGO 2016-7714 is a 1-conductor N-disconnect terminal block from the TOPJOB S 2016 Series, rated 76 A at 250 V per IEC/EN 60947-7-1 (overvoltag...

The WAGO 2016-7604 is a 2-conductor supply terminal block from the TOPJOB S 2016 Series, designed for fault-free electrical installations in distri...

The WAGO 2016-7601 is a 2-conductor supply terminal block from the TOPJOB S 2016 Series, designed for distribution boxes and DIN-rail panel assembl...

The WAGO 2002-409/000-006 is a 9-way insulated push-in type jumper bar in blue for commoning rail-mount terminal blocks in the TOPJOB S 2002 Series...

The WAGO 2002-407/000-006 is a 7-way insulated push-in type jumper bar for the TOPJOB S 2002 Series rail-mount terminal blocks. Rated at 800 V (III...

The WAGO 2002-406/000-006 is a 6-way insulated push-in type jumper bar in blue, used to common multiple terminal blocks across six positions (assig...

The WAGO 2002-1404 is a 4-conductor through terminal block from the TOPJOB S 2002 Series, rated at 24 A and 800 V per IEC/EN 60947-7-1, designed fo...

The WAGO 243-504 is a MICRO PUSH WIRE® splicing connector from the 243 Series, designed for junction box wiring in low-voltage building installatio...

The WAGO 243-113 is a mounting carrier from the 243 Series, designed to hold up to 6 MICRO PUSH WIRE connectors for organized wiring in distributio...

The WAGO 243-204 is a 4-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for low-voltage installations in buildings such ...

The WAGO 243-208 is an 8-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for low-voltage installations in buildings incl...

The WAGO 207-4301 is a branch junction box for multicore cables, designed for use with 221 Series connectors up to 4 mm² and capable of connecting ...

The WAGO 773-602 is a 2-conductor PUSH WIRE splicing connector from the 773 Series, designed for quick and secure conductor connections in surface ...

The WAGO 2202-1201 is a 2-conductor through terminal block from the TOPJOB S 2202 Series, designed to connect electrical conductors quickly and saf...

The WAGO 221-500 is a mounting carrier for the 221 Series, designed to hold 2-, 3-, and 5-conductor 221 Series Splicing Connectors (4 mm²) on a DIN...

The WAGO 2587-2147 is a 1-phase, DIN-35 rail-mounted switched-mode power supply that converts 100–240 VAC mains to a regulated 24 VDC SELV output a...

The WAGO 2587-2146 is a single-phase switched-mode power supply for DIN-35 rail mounting, delivering a 24 VDC SELV output at up to 10 A for industr...

The WAGO 2587-2144 is a single-phase, base-type switched-mode power supply for DIN-35 rail mounting. It converts a wide-range 100…240 VAC mains inp...

The WAGO 206-1250 is a manual crimping tool for applying insulated and uninsulated ferrules to conductors with a cross-section of 35 mm² or 50 mm²....

The WAGO 206-1204 Variocrimp 4 is a crimping tool for terminating insulated and uninsulated ferrules across conductor cross-sections from 0.25 to 4...

The WAGO 206-1125 Quickstrip Vario is a Standard wire stripper with integrated wire cutter for preparing solid, fine-stranded, and stranded conduct...

The WAGO 210-721 is a metal operating tool with a partially insulated shaft and a 5.5 x 0.8 mm blade, suited for front-entry terminal blocks. Blade...

The WAGO 210-720 is a metal operating tool with a 3.5 x 0.5 mm blade and a partially insulated shaft, designed for easy operation of front-entry te...

The WAGO 221-500/000-006 is a blue mounting carrier for the 221 Series, designed to hold 2-, 3- and 5-conductor 221 Series Splicing Connectors rate...