Schneider Electric Components | Circuit Breakers, Contactors, PLCs & More

The Schneider Electric C104TM100 is a TM-D thermomagnetic trip unit rated 100 A at 40°C, designed for use with ComPacT NSX100, NSX160, and NSX250 n...

The Schneider Electric C106TM100 is a TM-D thermal-magnetic trip unit compatible with ComPacT NSX 100, NSX 160, and NSX 250 new-generation circuit ...

The Schneider Electric C10F44V040 is a 4-pole differential circuit breaker from the ComPacT NSX new generation range (NSX100F), rated 40 A at 40 °C...

Schneider Electric C16F44V160 is a complete ComPacT NSX160F molded case circuit breaker (MCCB) for low-voltage distribution. It's a fixed 4-pole / ...

The Schneider Electric C2545E250 is a MicroLogic 5.2 E electronic trip unit for ComPacT NSX250 new-generation circuit breakers, providing LSI prote...

Schneider Electric C404400S is a complete ComPacT NSX400NA switch disconnector (load break switch) for controlling and isolating low-voltage distri...

The Schneider Electric MicroLogic 6.3 E-M (C6336M500) is an electronic trip unit for the ComPacT NSX630 circuit breaker, rated at 500 A and designe...

The Schneider Electric CA2KN22P7 is a TeSys K auxiliary contactor with a 2 NO + 2 NC contact arrangement and a 230 V AC coil, designed for use in c...

The Schneider Electric GV2MCK04 is a GV2MC series enclosure for TeSys GV2ME motor circuit breakers, fitted with a mushroom-head emergency stop butt...

Schneider Electric GV2ME143 is a TeSys GV2 motor circuit breaker (manual motor starter) designed for control and protection of 3-phase motors. It's...

The Schneider Electric LADN02 is a front-mounting auxiliary contact block from the TeSys Deca range, fitted with 2 normally closed (NC) instantaneo...

The Schneider Electric LC1D128E7 is a 4-pole (2 NO + 2 NC) TeSys D series contactor designed for AC-1 category resistive load switching. It is cont...

The Schneider Electric LC1D188P7 is a TeSys D series 4-pole contactor (2 NO + 2 NC) rated for AC-1 resistive load applications, with a 230 V AC 50/...

The LC1K0610B7 is a TeSys K series 3-pole minicontactor from Schneider Electric, rated at 6 A in AC-3 and AC-3e duty at up to 440 V AC. Fitted with...

The Schneider Electric LC2K0910B7 is a 3-pole TeSys K reversing contactor, pre-assembled with phase reversal, intended for motor control and resist...

The Schneider Electric LV429290 is a 4-pole plug-in base kit, classified as a mounting accessory, designed to enable plug-in installation of Compac...

The LV432539 is a 4-pole plug-in socket kit from Schneider Electric, supplied as a mounting accessory for ComPact NSX400 and NSX630 moulded-case ci...

The Schneider Electric LV434000 is the Enerlin'X IFM Modbus serial interface module for a single circuit breaker, providing Modbus slave communicat...

The Schneider Electric LV434201 is a ULP communication cable with a terminal block connector, measuring 1.3 m in length. It is designed for interna...

The Schneider Electric LVS04200 is a Linergy TB earth busbar supplied as an earthing accessory for use within PrismaSeT G and PrismaSeT P enclosure...

The Schneider Electric LXD1B7 is a TeSys D series replacement contactor coil (LXD1 range) rated at 24 V AC 50/60 Hz, designed for use with LC1D09–D...

The Schneider Electric LXD1F7 is a replacement contactor coil from the TeSys D range (LXD1 series), rated at 110 V AC 50/60 Hz. It is designed as a...

The Schneider Electric METSEPM5560 is a PowerLogic PM5560 flush panel-mount multifunction power meter designed for energy consumption monitoring, W...

The Schneider Electric TM3AM6 is a Modicon TM3 analogue input/output expansion module compatible with Modicon M221, M241, M251, and M262 controller...