Power and Connectors

The Phoenix Contact UT 2,5 RD (catalog number 3045062) is a feed-through terminal block rated at 1000 V and 24 A with M3 screw connection. Acceptin...

The Phoenix Contact FBS 5-10 is a 5-position plug-in bridge for paralleling modular terminal blocks at a 10.2 mm pitch. With a maximum load current...

The ZB 6:UNBEDRUCKT is a Phoenix Contact Zack marker strip for identifying modular terminal blocks and electronics modules fitted with tall marker ...

The Phoenix Contact SKS 14 is a shield connection terminal block designed for applying cable shields directly to busbars. Using spring-cage connect...

The Phoenix Contact FBS 6-6 is a 6-position plug-in bridge designed for rapid potential connection across multiple terminal blocks in the CLIPLINE ...

The PT 1,5/S-QUATTRO BU is a Phoenix Contact four-conductor feed-through terminal block with tool-free push-in connection, housed in a compact 3.5 ...

The Phoenix Contact PTC 4-HESILED 24 (5X20) is a fuse modular terminal block for 24 V nominal voltage systems, accommodating G / 5 x 20 glass or ce...

The WAGO 207-1432 is a Size 2 Gelbox Branch housing designed to protect 221 Series splicing connectors carrying cables up to 6 mm² in wet and damp ...

The Weidmuller A2C 6 is a WPE protective earth terminal block, 2mm2, yellow-green. For PE conductor distribution in control panels. DIN rail mounti...

The D-PT 1,5/S-QUATTRO is a Phoenix Contact end cover that closes and protects the ends of DIN rail terminal block rows. Measuring 2.2 mm wide, 63....

Weidmüller 1521540000 (type A4C 2.5 PE) is a protective earth (PE) DIN-rail terminal block for connecting PE conductors to the mounting rail (earth...

The Phoenix Contact UK 5 N is a gray feed-through terminal block rated at 800 V nominal voltage and 32 A nominal current. Accepting rigid conductor...

The Phoenix Contact D-UK 4/10 is an end cover designed to provide a clean, protective termination for UK-series terminal block assemblies on DIN ra...

The Phoenix Contact D-UDK 4 is an end cover designed to close and protect the ends of DIN rail-mounted terminal block assemblies. Measuring 1.5 mm ...

The Phoenix Contact UDK 4 is a 4-connection feed-through terminal block rated at 630 V and 32 A, designed for multi-conductor wiring on standard DI...

The Meanwell XDR-120E-24 is a fanless ultra-slim AC-DC DIN rail power supply with a 24V 5A (120W) output, rated to Overvoltage Category III (OVC II...

The Phoenix Contact PT 2,5-TWIN BU is a three-conductor feed-through terminal block rated at 800 V and 24 A, using tool-free push-in connection for...

The Phoenix Contact UTME 4 is a compact test disconnect terminal block rated at 500 V and 28 A nominal current for use in industrial control and au...

The WAGO 243-808 is an 8-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for low-voltage building installations in junct...

The WAGO 243-504 is a MICRO PUSH WIRE® splicing connector from the 243 Series, designed for junction box wiring in low-voltage building installatio...

The WAGO 243-113 is a mounting carrier from the 243 Series, designed to hold up to 6 MICRO PUSH WIRE connectors for organized wiring in distributio...

The WAGO 243-304 is a 4-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for junction box use in low-voltage building ins...

The WAGO 243-204 is a 4-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for low-voltage installations in buildings such ...

The WAGO 221-500 is a mounting carrier for the 221 Series, designed to hold 2-, 3-, and 5-conductor 221 Series Splicing Connectors (4 mm²) on a DIN...