Power and Connectors

The ATP-STTB 4 from Phoenix Contact is a partition plate designed to electrically isolate and separate adjacent terminal blocks within DIN rail ass...

The Phoenix Contact D-STTB 2,5 (catalog number 3030459) is a gray end cover designed to terminate and protect DIN rail-mounted terminal block assem...

The WAGO 2003-7645 is a three-level multilevel installation terminal block from the 2003 Series (TOPJOB S), designed for L/L/PE potential distribut...

The Weidmuller A2C 10 is a WDU feed-through terminal block, 2mm2, 1000V, 57A, Beige. For general conductor feed-through in control panels. DIN rail...

The Phoenix Contact FBS 5-6 is a 5-position plug-in bridge for paralleling adjacent modular terminal blocks in a single snap-in operation. With a 6...

The Phoenix Contact UT 4-MT-P/P is a knife-disconnect terminal block from the UT product family, designed for convenient in-circuit isolation with ...

The Phoenix Contact SK 35 is a steel shield connection terminal block that attaches cable shields onto neutral busbars with a contact resistance be...

The Phoenix Contact UC-TMF 5 is a white (RAL 9010) terminal block marker supplied in sheet format, designed for latching onto terminal blocks with ...

The WAGO 2016-1301 is a 3-conductor through terminal block in the TOPJOB S 2016 Series, rated 76 A at 800 V AC per IEC/EN 60947-7-1 and certified E...

The THERMOMARK-RIBBON 110/50-TC (catalog number 0801384) is a thermal transfer ink ribbon from Phoenix Contact, designed for use with the THERMOMAR...

The WAGO 221-941/000-006 is a 2-way insulated blue jumper for conductor entry, used with WAGO 221 Series splicing connectors. It bridges positions ...

The WAGO 2203-7641 is a multilevel installation terminal block from the 2203 Series, designed to streamline wire connections in DIN-rail mounted en...

The WAGO 221-942/000-006 is a 2-way insulated jumper for the 221 Series splicing connectors, designed to extend N and PE (ground) distribution betw...

The Weidmuller 2434340000 is a terminal block for industrial wiring. AMC 2.5 Motor-Connection Terminal, PUSH IN, 2.5mm² 22A 690V, Dark Beige.Techni...

The ZB 6,LGS:FORTL.ZAHLEN 1-10 is a Phoenix Contact Zack marker strip for labeling modular terminal blocks and electronics modules with tall marker...

The Weidmuller 1784180000 DLD 2.5 is a double-deck terminal block with two independent connection levels on a single DIN rail position, rated for 2...

The Phoenix Contact UNO-PS/1AC/24DC/240W is a primary-switched DIN rail power supply providing 24 V DC / 10 A (240 W) from a universal 1-phase AC i...

The Phoenix Contact PT 16 N BU is a feed-through terminal block rated at 1000 V nominal voltage and 76 A nominal current, designed for high-current...

The Phoenix Contact ST 2,5-TWIN BU is a compact blue feed-through terminal block that connects three conductors in a single 5.2 mm wide unit. Its s...

The ZB 5,LGS:FORTL.ZAHLEN 81-90 is a Phoenix Contact Zack marker strip pre-printed with consecutive numbers 81 to 90. This 10-section terminal mark...

The FBS 2-16 is a 2-position plug-in bridge from Phoenix Contact designed to electrically connect adjacent terminal blocks in the CLIPLINE complete...

The WAGO 207-1332 is a branch gelbox from the 207 Series, designed to enclose WAGO 221 and 2x73 Series splicing connectors (not included) and seal ...

ZB 5,LGS:FORTL.ZAHLEN 41-50 is a Phoenix Contact Zack marker strip pre-printed with consecutive numbers 41 to 50 for horizontal terminal block iden...

The Weidmuller 1609820000 is a marker / label for industrial wiring. DEK 5/6 MC NE WS Terminal Marker, 5x6mm, White - pack of 100. Technical specif...