WAGO 2002-1611 TOPJOB S 2-Conductor Fuse Terminal Block 2.5mm² 5x20mm

The WAGO 2002-1611 is a 2-conductor fuse terminal block from the TOPJOB S (2002) series, featuring a pivoting fuse holder and end plate for a 5 x 20 mm cylindrical miniature metric fuse. It uses Push-in CAGE CLAMP technology with a 2.5 mm² nominal cross-section, accepting solid and fine-stranded copper conductors from 0.25 to 4 mm² via front-entry wiring. The block carries no blown fuse indication and mounts on DIN-35 rail (35 x 15 mm and 35 x 7.5 mm).

Sold as a pack of 50 pieces.

Technical specifications:

• Catalog number: 2002-1611
• Manufacturer: WAGO
• Series: TOPJOB S, 2002 Series
• Type: 2-conductor fuse terminal block with pivoting fuse holder and end plate
• Fuse type: Cylindrical fuse, 5 x 20 mm
• Connection technology: Push-in CAGE CLAMP, actuation type: operating tool
• Nominal cross-section: 2.5 mm²
• Solid conductor: 0.25 - 4 mm² / 22 - 12 AWG; push-in: 0.75 - 4 mm² / 18 - 12 AWG
• Fine-stranded conductor: 0.25 - 4 mm² / 22 - 12 AWG; with insulated ferrule: 0.25 - 2.5 mm² / 22 - 14 AWG; with ferrule push-in: 1 - 2.5 mm² / 18 - 14 AWG
• Strip length: 10 - 12 mm / 0.39 - 0.47 in
• Rated voltage: 250 V (IEC/EN 60947-7-3, overvoltage category III, pollution degree 3); 250 V (UL 1059); 275 V (Ex e II)
• Rated current: 6.3 A (IEC/EN 60947-7-3); 10 A (UL 1059, groups B/C/D); 6.3 A (Ex e II)
• Rated impulse withstand voltage: 6 kV
• Maximum power loss: 1.6 W
• Clamping units: 2; jumper slots: 2; potentials: 1
• Mounting: DIN-35 rail (35 x 15 mm and 35 x 7.5 mm)
• Dimensions (W x H x D): 6.2 x 66.1 x 57.2 mm
• Color: gray
• Weight: 13.4 g
• Insulation material: Polyamide (PA66), UL94 V0
• Continuous operating temperature: -60 to +105 °C
• Processing temperature: -35 to +85 °C
• Approvals: UL 1059, CSA 22.2 No 158, ATEX KIWA 17 ATEX 0030 U / IECEx KIWA 17.0014U (Ex ec IIC Gc)
• Standards: IEC/EN 60947-7-3; railway testing to DIN EN 50155:2022-06 and DIN EN 61373:2011-04
• Marking level: center/side

Features and benefits:

• Push-in CAGE CLAMP accepts solid and fine-stranded conductors with or without ferrules directly, with no tools required for tool-free insertion
• Pivoting fuse receptacle provides quick fuse access without removing the terminal block from the DIN rail
• ATEX and IECEx certified (Ex ec IIC Gc) for use in hazardous area installations rated to 275 V / 6.3 A (Ex e II)
• Tested to DIN EN 50155 and DIN EN 61373 Category 1 Class A/B for railway rolling stock applications
• UL94 V0 polyamide housing with a -60 to +105 °C continuous operating range for demanding industrial environments

Applications:

• Per-circuit overcurrent protection on DIN-rail industrial control and distribution panels
• Fused terminal connections in Ex-protected hazardous area control cabinets
• Railway rolling stock wiring where DIN EN 50155 compliance is required
• Machine control enclosures requiring front-access conductor insertion with inline fusing

Also known as: WAGO 2002-1611, WAGO TOPJOB S 5x20 fuse terminal block, 2002-1611 push-in fuse terminal.