Phoenix Contact Components | Terminal Blocks & More

The UCT-WMCO 3,5 (12X4) is a clip-on conductor marker sheet from Phoenix Contact, designed for the subsequent labeling of wires with an external di...

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The Phoenix Contact FBST 500-PLC GY is a continuous plug-in bridge that parallels adjacent terminal blocks across an entire row in a single operati...

The Phoenix Contact ST 2,5-TWIN is a three-conductor spring-cage feed-through terminal block rated at 800 V nominal voltage and 24 A nominal curren...

The Phoenix Contact ATP-UT-TWIN is a partition plate designed for use with twin-entry terminal blocks, providing physical separation and insulation...

The Phoenix Contact UT 6 BU is a 1000 V, 41 A blue feed-through terminal block using M4 screw connection for conductors from 0.2 mm² to 10 mm², wit...

The Phoenix Contact URTK 6 is a test disconnect terminal block developed specifically for use in current transformer secondary circuits, rated at 5...

The FBS 50-6 is a 50-position plug-in bridge from Phoenix Contact, designed to link up to 50 terminal blocks simultaneously in a single insertion s...

The REL-IR4/LDP-110DC/4X21 is a plug-in industrial relay from Phoenix Contact with 4 changeover contacts and a 110 V DC coil, integrating a freewhe...

The Phoenix Contact RIF-RH-2 is a retaining bracket from the RIFLINE complete product family, designed to hold industrial relays securely on their ...

The RIF-2-BPT/4X21 is a relay base from Phoenix Contact's RIFLINE complete product family, designed to accept industrial relays with 2 or 4 changeo...

The Phoenix Contact UCT-WMCO 5,4 (23X8) is a clip-on wire marking sheet for conductor identification, compatible with cables from 4.7 mm to 5.4 mm ...

The UCT-WMCO 4,1 (12X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent conductor identifica...

The ZB 5,LGS:FORTL.ZAHLEN 91-100 is a Phoenix Contact Zack marker strip for terminal blocks with a 5.2 mm pitch, pre-printed horizontally with the ...

The ZB 5,LGS:FORTL.ZAHLEN 71-80 is a Phoenix Contact Zack marker strip pre-printed with the consecutive numbers 71 to 80, providing ready-to-use te...

The ZB 5,LGS:FORTL.ZAHLEN 51-60 is a Phoenix Contact Zack marker strip for terminal blocks with a 5.2 mm pitch, horizontally pre-printed with conse...

The THERMOMARK-RIBBON 110/50-TC (catalog number 0801384) is a thermal transfer ink ribbon from Phoenix Contact, designed for use with the THERMOMAR...

The UCT-WMCO 6,8 (23X8) is a clip-on conductor marker from Phoenix Contact for subsequent labeling of cables with an external diameter of 6.1 mm to...

The Phoenix Contact US-EMLP (49X15) is a self-adhesive PVC device marker card for equipment, panel, and cable identification. Each card holds 18 pr...

The Phoenix Contact UC-EMLP (49X15) is a self-adhesive plastic device marker supplied in sheet format for clear identification of electrical equipm...

The Phoenix Contact US-EML (15X6) is an adhesive device marker supplied in pre-punched sheets of 132 white (RAL 9010) polyester labels, each 15 mm ...

The Phoenix Contact UC-EMP (27X15) is a snap-in device marker supplied in sheets of 8 individual labels (2 per row), each measuring 27.00 mm wide b...

The SB 2-RTK/S is a 2-position copper bridge bar from Phoenix Contact, designed to electrically connect adjacent RTK-series terminal block position...

The Phoenix Contact ZB 10:UNBEDRUCKT (catalog number 1053001) is an unmarked Zack marker strip for modular terminal blocks and electronics modules ...