Latest Products

The Runpotec 20665 is a cable pulling grip (Chinese finger / pulling sock) with a swivel loop, designed to grip cables of 30-40mm diameter for pull...

The Runpotec 10197 GF3 is a cable pulling tool with a 3mm diameter fibreglass rod measuring 30m in length. It is the version without a digital mete...

The Runpotec 10193 GF3 is a cable pulling tool with a 3mm diameter fibreglass rod measuring 30m in length, fitted with a digital meter counter that...

The Runpotec 10020 RUNPOSTICK COMFORT is a 19-part cable pulling kit for installing cables through unguided conduits, ducts, and pipelines. The sys...

The Runpotec 10014 RP5 is a 30-metre polyester cable pulling system without a digital metre counter, stored in a compact plastic box. The 5.5mm tri...

The Runpotec 21008 is a wall-mount bracket for the Runpotec CB 260 cable basket system. It allows the cable storage basket to be mounted securely o...

The Runpotec 21006 CB 260 cable guide clip is an accessory for the CB 260 Cable Box single-wire roller. It mounts on the right-hand side of the CB ...

The Runpotec 21005 CB 260 wire roller is a cable guide accessory for use when pulling cables through conduit and trunking systems. It reduces frict...

Designed to guide individual conductors during installation in cable conduits and trunking, reducing friction and preventing insulation damage.Tech...

The Runpotec 10137 XB 300 is a cable roller for guiding and protecting cables during installation, reducing friction when pulling cables in open tr...

The Apator ARS 2-6-M pro is a 3-pole, in-line (vertical strip) HRC fuse switch-disconnector for busbar-mounted industrial switchgear assemblies. It...

The Apator ARS 00/100 mm pro (reference 63-811628-041) is a 3-pole NH00 in-line HRC fuse switch-disconnector for vertical strip installation on 100...

The Apator ARS 2-6-M evo is a 3-pole in-line (vertical strip) HRC fuse switch-disconnector for 400 A, 690 V AC power distribution circuits, providi...

The Apator ARS 630-6-2V pro (reference 63-011802-031) is a 3-pole NH size 3 in-line (vertical strip) high rupturing capacity (HRC) fuse switch-disc...

The Apator 1119510081T is an aluminium V-clamp single-conductor terminal in the SW-B range, accepting conductors from 35 to 300 mm². It is a V-type...

The Apator RBK 1 pro-SD-M 60 is a 3-pole NH1 HRC (High Rupturing Capacity) fuse switch-disconnector for industrial power distribution, rated 250 A ...

The Apator RBK 2 pro-SD-M 60 is a 3-pole NH2 HRC fuse switch-disconnector for power distribution and circuit isolation in industrial installations ...

The WAGO 249-117 is a screwless end stop, 10 mm wide, designed to secure rail-mount terminal blocks against movement on DIN-35 rails per DIN EN 607...

The WAGO 2003-7645 is a three-level multilevel installation terminal block from the 2003 Series (TOPJOB S), designed for L/L/PE potential distribut...

The WAGO 2203-7641 is a multilevel installation terminal block from the 2203 Series, designed to streamline wire connections in DIN-rail mounted en...

The WAGO 793-5472 is a pre-printed WMB marker card supplied ready-marked with the standard electrical distribution symbols L1, L2, L3, N, and PE in...

The WAGO 793-5566 is a WMB marking card pre-marked with consecutive numbers 1 to 50, with the full sequence repeated twice across the card, for hor...

The WAGO 2002-406 is a 6-way insulated push-in type jumper bar from the TOPJOB S product group, designed to common multiple terminal positions acro...

The WAGO 2001-405 is a 5-way insulated push-in type jumper from the TOPJOB S series, used to common adjacent terminals in the 2001 Series rail-moun...